Center display options - Gauges

[Doug Nash]

7/22

Hi All - Do I have the option to display these gauges in my center display? Pic taken from one of the posts. Mine is a 2013 GTS. I've gone through (I think) the screen options and even had a had copy owners manual printed but do not see this. I would certainly prefer this to seeing whoever is playing on the radio station in giant font. I believe that the display pics I took are from a '14. Thanks if you can help.

Sincerely, Analog Dougcenter display options.jpg


UPDATE: THANK YOU TO THOSE THAT RESPONDED. I FEEL BETTER IN THAT I DID NOT MISS SOMETHING OBVIOUS. THAT BAD NEWS IS THAT WHERE I SHOULD HAVE 'SRT' / APPS I ONLY HAVE 'APPS/UCONNECT 3G'. THIS GIVES ME A SRT PERFORMANCE OPTIONS TAB, BUT WHEN I SELECT I ONLY GET AN 'INITIALIZING' NOTICE WITH MOVING DOTS THEN A BLANK SCREEN. IF ANYONE HAS WORKED THROUGH THIS ISSUE IT WOULD BE APPRECIATED!
DOUG

[lochnessmonster]

Hi Doug,

Yes you can have those gauges displayed. Go to the bottom far right selection for "SRT/Apps" and select that. Once the options come up you can select the "Performance pages" I believe (not certain, but on mine there were only two choices so it's one of those). Once you get to the next screen go down to "Guages Display #1" on the left had side, and that will allow you to see those gauges. "Guages display #2" provides an additional two gauges as I recall. Again, this is all from my crappy memory, but I think it will get you to where you want to go. Cheers.

[Rare Snake]

When I first got my '14, the SRT icon in the lower right corner wasn't there sometimes, it showed the Settings icon instead. On of my very techy friends found an update, and it's been there ever since.

[Nine Ball]

No, you cannot view those gauges on the dash center section. You can, however, pick which of the four tiny bar graph gauges you can view that surround that dash center panel. When I race the car, I just set the radio panel to Gauges 2. I wish it would default directly to those Gauges 2 whenever the car is started.

[swexlin]

I use Display 2 at all times when driving. I know the names of the Sirius station I'm listening to, and once I set the climate, I'm done.

That gauge display "on", and tire pressure at ALL times in my dash display. That's how I drive!

[v10enomous]

I wish there was a way to switch the the tach and speedometer back and forth to have a larger speedometer in the center for road use. It's a pain to have the speedometer reading at the bottom left of the gauge cluster so small when I don't have my reading glasses on

[Nine Ball]

I wish there was a way to switch the the tach and speedometer back and forth to have a larger speedometer in the center for road use. It's a pain to have the speedometer reading at the bottom left of the gauge cluster so small when I don't have my reading glasses on

You haven't figured out how to put the digital mph on the tach yet? It is an option in the menus.

[v10enomous]

You haven't figured out how to put the digital mph on the tach yet? It is an option in the menus.

I figured that there might be a way to do it but haven't spent much time playing around with it. I actually feel a little guilty now that I enjoy the sound system in my GenV so much although I will say that my 70 Chevelle SS back in 1976 had a better 8trk sound system by far than my GENII

Where in the menu is this digital MPH option ?

[lochnessmonster]

No, you cannot view those gauges on the dash center section. You can, however, pick which of the four tiny bar graph gauges you can view that surround that dash center panel. When I race the car, I just set the radio panel to Gauges 2. I wish it would default directly to those Gauges 2 whenever the car is started.

I figured the OP meant he wanted to see the gauges as displayed in the picture, because that display is in the "center" of the car, and the word "dash" was not used in his post, combined with the fact that all that information can be viewed as Nineball has indicated, which would be duplicitous if placed on the "dash" center display.

OP if you want to see the gauges displayed as shown in your '13, then you can as per my post. If you want them on your "dash" as shown, then as Nineball says, you have other options.

[Doug Nash]

Update: Thank you to those that responded. I feel better in that i did not miss something obvious. That bad news is that where i should have 'srt' / apps i only have 'apps/uconnect 3g'. This gives me a srt performance options tab, but when i select i only get an 'initializing' notice with moving dots then a blank screen. If anyone has worked through this issue it would be appreciated!
Doug

[lochnessmonster]

Hi Doug,

When I purchased my car from the original owner, he had not done the latest update to the UConnect system. Once I completed this update a few additional features were added and I believe the SRT/Performance pages is one of them. I think the first thing to do is verify if you have the latest system software running.

[lochnessmonster]

Doug,

Just as a follow up, I am currently downloading the "patch" as referenced in the other thread about the hacking of the UConnect system. If you download this latest version of the software, you should have the SRT/Apps available.

[dethred]

Doug,

Just as a follow up, I am currently downloading the "patch" as referenced in the other thread about the hacking of the UConnect system. If you download this latest version of the software, you should have the SRT/Apps available.

This. My car came without a functioning performance pages app, but after installing the previous update it worked fine. Now to find out a way to make it a default page when starting the car.

[Doug Nash]

OKAY - So after talking to UConnect, SRT, UConnect, SRT (seriously) being in and out of the car in a hot garage it was decided that to have this function (g-load, Gauge 1, 2, etc) that it was only available as part of the $19.95 per month 'premium' package that gives you Pandora, etc. Seriously? I know I'm the second owner of a used car but a one year old car that listed for $136K. Unbelievable.

[ViperSmith]

They are wrong, the performance pages aren't part of the UConnect services. Someone doesn't know what they are talking about. I still haven't enabled UConnect on my car and I have access to them all.

[Doug Nash]

Doug,

Just as a follow up, I am currently downloading the "patch" as referenced in the other thread about the hacking of the UConnect system. If you download this latest version of the software, you should have the SRT/Apps available.

Lochness,

Are downloading onto a mem stick to install yourself? I'm trying not to go to dealer in which case I would live with the small radings aroung the driver dash cluster. If this works I would try it!

[lochnessmonster]

Hi Doug,

Yes, I just completed the latest update on my lunch break. Here's how to do it:

1. Get a mem stick that will hold at least 4 GB of data and clear everything off of it so it is absolutely empty.
2. Google search UConnect, and select the software upgrade option.
3. Enter your VIN # and it will take you through the remaining steps. Note that you want to download the file onto the memory stick, so if you need to, select "save as" when prompted, and select the memory stick location, so you don't mistakenly download it onto your computer hard drive.
4. Note: you will download a file onto the memory stick, but then you need to double-click on the file once it is on your stick to get the files extracted.
5. After the files have been extracted, take the memory stick to your car. Get in, and put the stick in the slot between the two seats next to the aux elec/cigarette plug.
6. Keeping your foot off the clutch, press the starter button until you get to run.
7. It should ask you if you want to upgrade your software from whatever you have to the following: 8.4AN_RA4_15.26.1_MY13_&_M14 You then say "Ok"

8. There should be 12 files in total, and the process will take approximately 15-20 minutes to complete.
9. Once you have completed it you can turn the car off and take the memorty stick out.
10. If you want to verify that the installation was successful, go to the settings tab and proceed to the very bottom selection which is "system information". That should display the latest software as I indicated above.

If you have any other questions just ask, and I'm sure we can get you through it. The whole process took me about 45 minutes to complete with download and installation. Good luck with it

PS: Note that this will not allow you to display the gauges you reference on the center "dash" cluster, but it should provide you with the SRT/Apps at the bottom of the main screen, and will also prevent someone from taking remote control of your car

[Doug Nash]

Thank you very much. Printed your directions. Cleaned off a mem stick and going to U connect then Car! Wish me luck,

[lochnessmonster]

You can dooooo iiiiiit

[swexlin]

I figured that there might be a way to do it but haven't spent much time playing around with it. I actually feel a little guilty now that I enjoy the sound system in my GenV so much although I will say that my 70 Chevelle SS back in 1976 had a better 8trk sound system by far than my GENII

Where in the menu is this digital MPH option ?

Charlie, yes, nice digital speed display I always have on. I never look at the actual speedo gauge.

[swexlin]

They are wrong, the performance pages aren't part of the UConnect services. Someone doesn't know what they are talking about. I still haven't enabled UConnect on my car and I have access to them all.

Correct, I don't have UConnect either, and I have all the performance pages.

[ViperJon]

Charlie, yes, nice digital speed display I always have on. I never look at the actual speedo gauge.

But it can't be put in the center can it? I've only been able to put it on the lower right or a corner. Am I stoopiddd?

[swexlin]

But it can't be put in the center can it? I've only been able to put it on the lower right or a corner. Am I stoopiddd?

LOL, not sure now, I have to go look! I know it's somewhere there on the dash where I can see it!

[ViperJon]

Here are the installation instructions: https://rsur.download.chrysler.com/1...0c47b8e0fcdd99

It does suggest a few extra steps after installing the software upgrade to make sure it works.

[lochnessmonster]

Yep, that's true. I had done an update previously and did this one from memory. I couldn't remember the last steps, that had something to do with turning the car off for a period of time, opening and closing the driver's side door etc. I just went ahead, loaded it, turned the car off, went inside to finish my lunch, and then came back outside started it up and verified that the system was properly updated. It seems to have worked just fine, but to be on the safe side, it's probably best to do the "hokey pokey" ending......