Afew pictures of my 14 srt coupe with mods

[XSTAR]

I want to see this blue with an all black "ACR like" centerband. That I do want...!

[FLATOUT]

I want to see this blue with an all black "ACR like" centerband. That I do want...!

I can tell you this blue in person looks even better than in pictures.

[mikesax]

The black is so necessary with this color! The before and after pics are night and day!! Looks fabulous-enjoy!!

[LmeaViper]

Very Nice...especially the back.

[timberwolf]

Hey guys, I wanted to share some pictures of my 14 srt coupe..Iv done afew tasteful mods, lowered on eibachs, full Belanger system, arrow pcm, under drive pulley,black tail light surround and smoked tails, brake and reverse lights, clear corners in the front, 5% tint, 15' viper badges, powdercoated fuel door and I swapped my hyper grey sidewinders for black ones...I'm really happy with this car and love how it's turning out. Thanks Jon b and Mark for getting me the parts needed!
Attachment 9753Attachment 9754Attachment 9755
Attachment 9756

Did you need to remove the front bumper to do the corner markers or just the wheel well liner?

[SammutRacing]

Hey guys, I wanted to share some pictures of my 14 srt coupe..Iv done afew tasteful mods, lowered on eibachs, full Belanger system, arrow pcm, under drive pulley,black tail light surround and smoked tails, brake and reverse lights, clear corners in the front, 5% tint, 15' viper badges, powdercoated fuel door and I swapped my hyper grey sidewinders for black ones...I'm really happy with this car and love how it's turning out. Thanks Jon b and Mark for getting me the parts needed!
Attachment 9753Attachment 9754Attachment 9755Attachment 9756

car looks great! just wondering since im in NY as well, who did your header and PCM install?

[timberwolf]

car looks great! just wondering since im in NY as well, who did your header and PCM install?

I'm in Stamford CT, and work in Rye Brooke NY are. I will have my car next week with PCM and would love to meet up and hear some headers myself! Would also love to hear the difference between stock tune and PCM upgrade.

Greg

[BJG32]

I absolutely love this color. I didn't, but definitely do now. At first I thought a white Gen V was the way to go, but now I would have a hard time not picking this blue! You might want to consider wrapping the roof in gloss black like this one on eBay




It's a tint specific paint. It can be applied at home with relative success, but a paint shop is your key to super high quality finishes. For the DIY'er, look up VHT Nite-shades.

That black roof is too vette like for my taste.

1evilviper....get some black lug nuts and paint that center cap!

[1evilviper]

Did you need to remove the front bumper to do the corner markers or just the wheel well liner?

no need to remove bumper, just peel the fender liner back and reach in...very easy

car looks great! just wondering since im in NY as well, who did your header and PCM install?

thanks a lot... Woodhouse did my headers before the car was delivered and the pcm is being done tomorrow at a local dealer

I'm in Stamford CT, and work in Rye Brooke NY are. I will have my car next week with PCM and would love to meet up and hear some headers myself! Would also love to hear the difference between stock tune and PCM upgrade.
Im in upstate NY, but id be down to go for a cruise and meet up with some fellow viper owners!

Greg

[timberwolf]

no need to remove bumper, just peel the fender liner back and reach in...very easy

thanks a lot... Woodhouse did my headers before the car was delivered and the pcm is being done tomorrow at a local dealer

How did you remove those bolt like caps on the inside that hold the markers in? I can't really access them well and since the shaft has no threads. Even with all the screws removed there's minimal space to work. Any input would be appreciated.

Greg

[1evilviper]

How did you remove those bolt like caps on the inside that hold the markers in? I can't really access them well and since the shaft has no threads. Even with all the screws removed there's minimal space to work. Any input would be appreciated.

Greg

I used a 10mm socket in my hand and spun the small little nuts off with just my fingers and the socket, they aren't very tight

[Aspirations57]

I used my hand and spun the small little nuts off with just my fingers they aren't very tight

Typical quote from a Viper girl on a date with a Vette owner...