Page 1 of 4 123 ... LastLast
Results 1 to 25 of 86
  1. #1
    Enthusiast
    Join Date
    Oct 2013
    Location
    North Carolina
    Posts
    1,361

    Get Your Motor Running V.2.0 Event!!!

    Here we go! It is "preventive maintenance season" for our Vipers. To help, on March 21st, we will host our "Get Your Motor Running V2.0" event to help get your Viper ready to slither through the season! This event was a huge success last year so we decided to do it again! This year we have upgraded this event to also include a Detail Clinic and we will wrap up the day with private club Dinner!!!

    If you plan to take part in ANY of the activities throughout the day, it is important that you read this post in it's entirety for instructions as we need you to RSVP!

    PART I - Maintenance Clinic
    Location: My Home, Raleigh, NC
    Time: 8:00am - 2:00pm

    We will have 2 lifts available to perform oil, differential, clutch, transmission, and brake fluid changes. If you're not a maintenance guru and have never done this before, that's okay! We have plenty experience on hand to help out and you can learn a lot about your Viper! Our club VP Mike Reeves and member Al Humphries from Capital Chrysler Jeep Dodge Ram in Garner will have a parts van on site stocked with the appropriate OEM oil filters, differential, clutch, transmission, and brake fluids available for purchase. They will also have a fluid disposal tank on site and will properly dispose of our used fluids for us! Otherwise, the only item you need to bring is your choice of motor oil! I believe most are running the Mobil 1 0W-40 formula these days. Below are the estimated oil fill capacities for the various generations (rounded up to the nearest quart):

    1992-2002 - 9 quart
    2003-2014 - 11 quart
    Of course it never hurts to buy an extra quart!

    I will provide FREE lunch to Carolina VOA members.

    If you do not have any maintenance needs, you may still feel free to attend to lend a helping hand, or just "hang out" with us. We had a lot of folks do that last year.

    PART II - Detail Clinic
    Location: Northridge Auto Spa, 7110 Sandy Forks Rd, Raleigh, NC
    Time: ~2:00pm - 5:00pm

    Club members Hap & Heidi Merritt are the owners of Northridge Auto Spa and have generously offered to host a detail clinic for us! We will discuss proper washing, polishing, waxing, and scratch & swirl removal techniques. If you have some flaws on your Viper, we may be able to help....and if your Viper has a perfect finish, we'll inform you how to keep it that way! We are also accepting members who want to volunteer their cars to be used as specimens during the clinic, so if you have minor flaws in your finish that you are not able to feel with your fingernail (i.e. swirls, fine scratches, rub marks, etc), reply to have them professionally examined and likely corrected!

    PART III - Dinner!
    Location: Nantucket Grill, 1145 Falls River Ave, Raleigh, NC
    Time: 5:15pm

    Immediately following the detail clinic, we'll take 15 min drive to Nantucket Grill where we will enjoy a private club dinner. The club is subsidizing $20/pp toward your meal, but if you could contribute toward purchases beyond $20 AND help us out with gratuity, that would be very much appreciated. We'll have our Stryker contribution cans handy during dinner. We've done it this way a couple times in the past for other club meals, and everyone has been very generous so we will continue doing it this way. Thanks everyone for you cooperation!

    RSVP DETAILS

    FINALLY! If you plan to attend this event, please RSVP ASAP with:

    1) The activities you will be attending (1 - Maintenance, 2- Detail Clinic, 3 - Dinner.....or post "ALL" if you plan to take part in all three activities)

    IF you are planning to service or have your car serviced, please indicate:

    2) The YEAR of your car.
    3) Indicate which fluids you would like to have replaced (O - Oil, D - Differential, C - Clutch, B - Brake, T - Transmission). Or, simply post up "ALL" if you wish to have all fluids replaced.
    4) Finally, please let us know if you be purchasing fluids "on-site" so we can ensure we have adequate inventory. A simple "YES" if you plan to purchase on-site or "NO" if you plan to purchase them elsewhere will do. Again, motor oil will not be provided, so bring your own, but everything else can be purchased from the parts van at VERY COMPETITIVE prices.

    For those coming from afar, a few of us have guest rooms available to accommodate your overnight stay. You are certainly welcome to them....or we also have some nice hotels in the area.

    Please let us know if you have any questions!

  2. #2
    Enthusiast
    Join Date
    Oct 2013
    Location
    North Carolina
    Posts
    107
    2008 ALL- O- Volunteer my car to be used as specimen

    Bill P
    Last edited by billp; 03-07-2015 at 10:37 PM.

  3. #3
    Enthusiast
    Join Date
    Mar 2014
    Location
    North Carolina
    Posts
    310
    1) All (Detail volunteer)
    2) 2000
    3) O
    4) No

    I may may need a place to stay, depending how late it gets. Thanks for the offer.
    Last edited by DaveW; 03-08-2015 at 09:57 AM.

  4. #4
    Enthusiast
    Join Date
    Oct 2013
    Location
    North Carolina
    Posts
    635
    I'll be there to hang out and help.

    No maintenance work for me as I'm pretty much up-to-date. Not sure at this time if I'm bringing the Viper, might hitch a ride to the detail clinic and dinner with someone if that's cool.

  5. #5
    Looking forward to a Great day.

    1 All
    2 1998
    3 All
    4 Yes

  6. #6
    Cones in for 1 & 3 - don't need any maintenance - but we'll be there ready to be put to work! I am an excellent brake bleeder. ;-)

    THANK YOU for this great event. Carolinas VOA ROCKS!!!!

  7. #7
    Enthusiast
    Join Date
    Mar 2014
    Location
    North Carolina
    Posts
    310
    Quote Originally Posted by PatrickB View Post
    I'll be there to hang out and help.

    No maintenance work for me as I'm pretty much up-to-date. Not sure at this time if I'm bringing the Viper, might hitch a ride to the detail clinic and dinner with someone if that's cool.
    Patrick,

    You're welcome to stop by my house that morning and ride over to Raleigh with me if you don't drive your Viper. PM me if you're interested.

  8. #8
    Enthusiast
    Join Date
    Oct 2013
    Location
    North Carolina
    Posts
    635
    Quote Originally Posted by DaveW View Post
    Patrick,

    You're welcome to stop by my house that morning and ride over to Raleigh with me if you don't drive your Viper. PM me if you're interested.
    Might do that Dave; I'll let you know. Thanks!

  9. #9
    Enthusiast
    Join Date
    Oct 2013
    Location
    North Carolina
    Posts
    1,361
    The list begins:

    Bill
    Dave
    Patrick
    Phil
    Randy
    Janni & Henry
    Craig
    Brian

    P.S. If any others plan to bring their spouse or guest, please let us know for the dinner planning.

  10. #10
    Enthusiast
    Join Date
    Oct 2013
    Location
    Willow Spring, North Carolina
    Posts
    141
    Terri and the twins will be there all day to help Al and whatever else needs done. I'm planning to be there as much as possible. The Viper is up to date. See you all then.

  11. #11
    !. All
    2. 2008
    3. All
    4. Yes

    I may need a place to stay over Saturday night.

    Fred

  12. #12
    Enthusiast
    Join Date
    Oct 2013
    Location
    North Carolina
    Posts
    1,235
    1. ALL

    If we have time I'll swap my diff fluid (I already have the fluid and friction modifier), otherwise I'll be a garage lackey.

    I have some weak clearcoat on a couple of my wheels, and if Hap has some detailing magic he can work on them, I'll volunteer my Viper for that.

    Really looking forward to this event again. The detailing and dinner are icing on the cake.

    Brian, what can I bring along for lunch? Drinks, etc?

  13. #13
    Melody plans on coming with me

  14. #14
    Enthusiast
    Join Date
    Oct 2013
    Location
    North Carolina
    Posts
    1,361
    Update...ooops, I just noticed that I missed Nina & Dugan who were the first to respond via e-mail!!! Sorry bout that!

    Nina & Dugan
    Bill
    Dave
    Patrick
    Phil & Melody
    Randy
    Janni & Henry
    Fred
    Mike, Terri, & Family
    Craig
    Brian

    P.S. If any others plan to bring their spouse or guest, please let us know for the dinner planning.

  15. #15
    Enthusiast
    Join Date
    Oct 2013
    Location
    North Carolina
    Posts
    1,361
    Quote Originally Posted by C.J View Post
    Brian, what can I bring along for lunch? Drinks, etc?
    Thanks Craig....Janelle and I will have lunch covered. Unless you want to bring a few "cold ones" like you did last year, the refrigerator will be stocked.

    Again, a BIG THANKS again for setting up the dinner arrangements for us!

  16. #16
    Enthusiast
    Join Date
    Sep 2014
    Location
    WNC
    Posts
    160
    1. ALL
    2. 2001
    3. O, D, C, T I have never done any of these but the oil and brake. I have no way to know how old the other fluids are.
    4. YES

    I will be by myself this time. I have some scratches and imperfections in my paint/finish so you could use my car.

    I have been using 10-30. I talked to JonB about it and he told me to start running 0-40 and not to use the OEM filters. You guys agree as well?

  17. #17
    Enthusiast
    Join Date
    Oct 2013
    Location
    North Carolina
    Posts
    1,361
    Quote Originally Posted by Josrocket View Post
    1. ALL
    2. 2001
    3. O, D, C, T I have never done any of these but the oil and brake. I have no way to know how old the other fluids are.
    4. YES

    I will be by myself this time. I have some scratches and imperfections in my paint/finish so you could use my car.

    I have been using 10-30. I talked to JonB about it and he told me to start running 0-40 and not to use the OEM filters. You guys agree as well?
    YES...fully agree on the 0W-40 Josh. Added you to the list!

    Nina & Dugan
    Bill
    Dave
    Patrick
    Phil & Melody
    Randy
    Janni & Henry
    Fred
    Mike, Terri, & Family
    Craig
    Josh
    Brian

    P.S. If any others plan to bring their spouse or guest, please let us know for the dinner planning.

  18. #18
    Enthusiast
    Join Date
    Apr 2014
    Location
    Cameron, NC
    Posts
    648
    Was a tough decision between this and tilted kilt. But I will be there. If possible I need to install my ipsco pulley and bracket and have no idea how to.

    1) all
    2)1998
    3)D, and ps bracket/pulley if possible
    4) Yes

  19. #19
    Enthusiast
    Join Date
    Mar 2014
    Location
    North Carolina
    Posts
    310
    Quote Originally Posted by braunstein82 View Post
    Was a tough decision between this and tilted kilt. But I will be there. If possible I need to install my ipsco pulley and bracket and have no idea how to.

    1) all
    2)1998
    3)D, and ps bracket/pulley if possible
    4) Yes
    Hey, Matt. As a suggestion, you might want to consider picking up a remanufactured ps pump as a backup. If there's any problem with removing the old pulley from your existing pump, it will be $50 well spent and you'll be right back on the road. Take it back if you don't use it.

  20. #20
    Enthusiast
    Join Date
    Oct 2013
    Location
    North Carolina
    Posts
    1,361
    2 more!

    Nina & Dugan
    Bill
    Dave
    Patrick
    Phil & Melody
    Randy
    Janni & Henry
    Fred
    Mike, Terri, & Family
    Craig
    Josh
    Matt
    Angela & Stuart
    Brian

    P.S. If any others plan to bring their spouse or guest, please let us know for the dinner planning.
    Last edited by Brian GTS; 03-10-2015 at 10:33 AM.

  21. #21
    Quote Originally Posted by Brian GTS View Post
    2 more!

    Nina & Dugan
    Bill
    Dave
    Patrick
    Phil & Melody
    Randy
    Janni & Henry
    Fred
    Mike, Terri, & Family
    Craig
    Josh
    Matt
    Angela & Guest
    Brian

    P.S. If any others plan to bring their spouse or guest, please let us know for the dinner planning.
    This is Angela And the guest would be the hubby Stuart Can't wait! My first offical non-GM anything LOL

    Pray for good weather yall!

  22. #22
    Enthusiast
    Join Date
    Oct 2013
    Location
    North Carolina
    Posts
    1,361
    Quote Originally Posted by SSNEAKN View Post
    This is Angela And the guest would be the hubby Stuart Can't wait! My first offical non-GM anything LOL

    Pray for good weather yall!
    Non-GM....LOL! Changed "guest" to Stuart! Looking forward to meeting you and Stuart!

  23. #23
    Enthusiast
    Join Date
    Jan 2014
    Location
    WNC
    Posts
    1,210
    Brian,

    Myself and son-in-law
    1. 1
    2. 2004
    3. O & T
    4 Y

    Thx

  24. #24
    Enthusiast
    Join Date
    Oct 2013
    Location
    North Carolina
    Posts
    1,235
    Quote Originally Posted by DaveW View Post
    Hey, Matt. As a suggestion, you might want to consider picking up a remanufactured ps pump as a backup. If there's any problem with removing the old pulley from your existing pump, it will be $50 well spent and you'll be right back on the road. Take it back if you don't use it.
    Brilliant idea! I'll bring my pulley remover too and a breaker bar.

  25. #25
    Enthusiast
    Join Date
    Oct 2013
    Location
    North Carolina
    Posts
    1,361
    Quote Originally Posted by C.J View Post
    Brilliant idea! I'll bring my pulley remover too and a breaker bar.
    Craig, next time you are by Costco, can you pick up some of those disposable towels like you did last year? Pick up a bunch of those boxes and whatever we don't use, I'll buy them....love those things. I already have plastic to put on the floor as we did last year. Thanks!


 
Page 1 of 4 123 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •