What are your 2015 mod plans?

[ViperSmith]

Ok, since it is sadly now Feb and tons of stuff has been and is coming out, what are your plans (or what have you done so far?) - power or cosmetic?

Love to see what others are doing and what their targets are

[Dman]

Performance-
Belanger headers, installed
Tune: either HPT or Arrow PCM, depending on test results of PCM

Cosmetic-
CF TA spoiler, installed (pics for effect), I'd also like to do canards maybe but pricey for what they are.

front spoiler.jpg
side spoiler.jpg
rear spoiler.jpg

[EdwardETraylorIII]

I'm planning to buy two more Gen V's in the next 4-6 months and Twin Turbo them.

[Murpowa]

I'm planning to buy two more Gen V's in the next 4-6 months and Twin Turbo them.

I was looking forward to the 2000+ hp build...what happened?

[FLATOUT]

My plan is to tweak my current setup and maybe have the heads ported this year. I also will need a clutch at somepoint, maybe sooner than later.

[Zybane]

Once my black TA2.0 comes in, I plan to do:

Matte black racing stripes
Bell STir-Plus built in radar detector
Anti-Laser Priority jammers
Install the MOPAR speaker upgrade kit
Ceramic coat the entire car + wheels
Install center brake light high intensity attention getter
Install upgraded exhaust if I deem the stock too quiet
3M Crystalline window tint on all four panels
Replace high-tone horn with deeper/louder horn, keep stock low-tone horn
Header wrap/band exhaust pipes

[ViperDC]

Once my black TA2.0 comes in, I plan to do:

Matte black racing stripes
Bell STir-Plus built in radar detector
Anti-Laser Priority jammers
Install the MOPAR speaker upgrade kit
Ceramic coat the entire car + wheels
Install center brake light high intensity attention getter
Install upgraded exhaust if I deem the stock too quiet
3M Crystalline window tint on all four panels
Replace high-tone horn with deeper/louder horn, keep stock low-tone horn
Header wrap/band exhaust pipes

That will be a badass car.

[1.8t]

American Racing Headers
Exhaust
MOPAR PCM - Already ordered
Spring caps
MOPAR speaker upgrade kit

[swexlin]

Just to be able to actually drive the car to see what it can do! Since it was delivered in October, the weather turned cold, then winter and crappy. 400 miles, and most of those pretty easy. Been sitting in the garage 6 weeks now.

[triblk6spd]

Corsa mufflers are done. Tomball spring caps are on the kitchen table. MGW knob, UD pulley, should arrive anybday. HRE P47SC I'll order next month...for now 3/8" spacers are on and look great. 3M Deep Matte Black stripes and matte black badges done as well.
Before summer...AR headers and cats, Arrow ECM.
Beyond that we will see how the ball bounces.

[VIPEREPIV]

While waiting for my Y'orange TA 2.0 to arrive, I've already purchased:

1. A shifter knob adapter
2. 3 different shift knobs (one of which I will have powder coated a matching orange
3. 2 sets of open ended lug nuts (one of which I will have powder coated a matching orange

I'm also going to purchase an extra front bumper cover and have it mildly bed lined. (for use on long road trips)

Headers/exhaust to come after break in.

Would also like to dive into the supercharger kit.

And trying to decide how I want to deal with the non aggressive offset of the matte black, sweet looking Sidewinder II wheels.

[kirkinsb]

For 2015:

1. 3.55 gears done this week
2. Aftermarket Coilovers.
3. Poly motor and transmission mounts

2014 included:
1. New set of Nitto Invos
2. CATS removed
3. Roe Racing 91 Octane SCT Tune
4. VSP Aftermarket Oil Cooler Lines
5. Magnaflow 12640 mufflers....Guy I bought it from had strait pipes on it. It was VERY loud.
6. New plugs, filters, oil, etc.

[KB Viper]

so far i've done:
15% tint
Lloyds mats with red logo
ceramic coated american racing headers with high flow cats flowing into stock mufflers
underdrive pulley
HP Tuners tune
Tomball lowering caps
Woodhouse Tow Hook
TA alignment

Planned mods:
2015 Viper emblems
Ceramic coat entire car including wheels. I actually have all the product (cquartz) but am waiting to apply until my Viper emblems come in.
TA front and rear sway bars
ported heads and single profile cam when available

[viperdriver5150]

so far i've done:
15% tint
Lloyds mats with red logo
ceramic coated american racing headers with high flow cats flowing into stock mufflers
underdrive pulley
HP Tuners tune
Tomball lowering caps
Woodhouse Tow Hook
TA alignment

Planned mods:
2015 Viper emblems
Ceramic coat entire car including wheels. I actually have all the product (cquartz) but am waiting to apply until my Viper emblems come in.
TA front and rear sway bars
ported heads and single profile cam when available

KB,

Can I ask where you bought the 2015 Viper emblems from and what was the cost?

[KB Viper]

KB,

Can I ask where you bought the 2015 Viper emblems from and what was the cost?

I ordered mine from courtesy Chevrolet in San diego, they own a dodge store also so they sell Chevy and dodge parts. I haven't picked them up yet so I'm not 100% sure on the cost, I think they are $25 each. I can update the thread when I know for sure. If you call courtesy and ask for Cedric, he'll have the part number and be able to hook you up.

[rlhay2]

I like that Woodhouse tow hook! And your car sounds good!

But what was the hacksaw used for?

[KB Viper]

I like that Woodhouse tow hook! And your car sounds good!

But what was the hacksaw used for?

thanks! i had to trim down the connections on the factory mufflers to get them to fit perfectly with the headers.

[FSTENUF]

so far i've done:
15% tint
Lloyds mats with red logo
ceramic coated american racing headers with high flow cats flowing into stock mufflers
underdrive pulley
HP Tuners tune
Tomball lowering caps
Woodhouse Tow Hook
TA alignment

Planned mods:
2015 Viper emblems
Ceramic coat entire car including wheels. I actually have all the product (cquartz) but am waiting to apply until my Viper emblems come in.
TA front and rear sway bars
ported heads and single profile cam when available

Who do I contact to get the tow hook from Woodhouse. I can't find it.
Thanks

[triblk6spd]

Who do I contact to get the tow hook from Woodhouse. I can't find it.
Thanks

And how much is it if you don't mind....?

[KB Viper]

Who do I contact to get the tow hook from Woodhouse. I can't find it.
Thanks

Mark Jorgensen

- - - Updated - - -

And how much is it if you don't mind....?

220 shipped

[Bruce H.]

Mods: driver

[LS6M]

BBK and ss lines for front and back with new pads and fluid which I just received in the mail today, thanks Jon B!

set of 19" rims which are being made right now, thanks nineball!

cf srt hood and other exterior cf stuff

turbos after I replenish the mod fund

[Junkie]

-Custom spring caps
-Nitrous Outlet plate kit
-Nitrous Outlet dedicated fuel cell
-some sort of triple disc clutch, probably BBG
-18" rear wheels with a big radial

race the ever living shit out of it

[viper04]

Junkie
Do you mine PM me the info on the -Custom spring caps and the Nitrous Outlet plate kit. I did'nt know they made a plate kit. Thanks

[Nine Ball]

The '14 TA will get headers, Corsa catback, tune, and maybe some lightweight monoblock Forgelines. Likely some Hoosier R7 tires for the track wheels. Then working on driver mod some more.

The '06 will take care of the straight line duties. Twin-turbos and a refreshed engine this year. Looking for 1500-1600 rwhp.