interior passenger door skin

[Don12]

Does anyone know the correct way to remove the inside door panel on passenger side of 94. I need to replace the 1" tweeter and have to remove the panel to do it. Thanks.

[Tom, F&L GoR]

door.JPG
This parts image should point out where all the phillips head screws are. Some will be buried in the black fabric. Everything is held on with the same size small sheet metal screws. The tricky part is the plastic around the door release (#8). With your thumbs in the recess, push the plastic piece towards the front of the car. It does not pop in and out, it needs to slide forward about 3/8" and then will fall off.

[ViperTony]

Tom, I'm so glad to see you posting again. The Viper community has been missing you and your helpful posts!!!

[Don12]

Thanks for the diagram Tom. It will really help me.

[Tom, F&L GoR]

Um, Don, maybe it slides to the rear. The point is, do not pry it off. The four attaching tabs are all pointing the same direction so it only slides horizontally, does not "come off" until it has slid far enough to disengage.