In search of the perfect lap timer / video system for Gen V

[XSnake]

Another video from my smartycam setup. Love being able to log IAT and coolant temps

[esm_viper]

Where do you have the camera mounted? Hanging from the rear glass?

Sorry, I just saw this. Yes, I hung the camera from the rear glass and the camera rested on top of the partition between the seats. I just got a longer extention poll and I'm going to mount the camera in front of the partiton and a little lower. Using velcro to secure on the bottom.

[GTSilver]

Anybody have procoachs (Peter Krause ) contact information? I would like to get the Solo dl and camera for my viper.

Thanks
Yousif

[Dusty1]

I believe you can find him here, peter@peterkrause.net

[GTSilver]

I believe you can find him here, peter@peterkrause.net

Thanks, appreciate it.

[stradman]

ECU Make:OBDII
ECU Model: CAN

You will need to unplug the OBDII cable from the receptacle under the dash overnight to allow the system not to trigger the vehicle CAN and run the battery down. No problem leaving it plugged in each day. Working on a solution for that.

Hi guys, can I ask where exactly is the OBD port on my 2016 ACR in order to plug in a Solo DL?? Many thanks

[1of1TA1.0]

Under your dash right above your left leg. You should spot it pretty fast

[stradman]

thanks!

[stradman]

Another video from my smartycam setup. Love being able to log IAT and coolant temps

Sorry to resurrect this thread again but how did you get the Brake input to work X-Snake? I cannot get mine to work on the standard OBD port

[ProCoach]

Typically, on the AIM SmartyCam, brake pressure or position don’t come through, so folks set up “Inline Acceleration” and set to -1.5 or -2g at full deflection. VBOX and some others get brake pressure/position and can put that in the video.