Gen 5 steering wheel on a gen 3/4 ?

[cubican]

Yes it will fit so far so good, Got a hold of a gen 5 wheel just to see if it will work pic
IMG_0388.jpg IMG_0389.jpg IMG_0387.jpg

Im still working on the airbag I will have one next week to play with, the feel of the wheel is exellent, and it changes the look of our interiors big time. Over the years I have done few different wheels on my car Alcantara flat bottom Carbon fiber lambo grips flat bottom not sure wich one Im going to keep but few of them will be forsale.pics

IMG_0390.jpg IMG_0391.jpg

If you have a gen 2 the wheel will work but the gide key needs to be filed down, can be done with a dremmel tool, the carbon fiber wheel on the pic can work on a gen2,3,4.

[FLATOUT]

So all of the electronics will be non functional?

[cubican]

Yes, if I get the air bag to work then I will work on the carbon fiber bezel and make it smooth no switches..

[FLATOUT]

Yes, if I get the air bag to work then I will work on the carbon fiber bezel and make it smooth no switches..

That would look great.

[Tiago]

that looks awesome, I've always thought the steering wheels are ugly as fuck on Gen 3.

[cubican]

I'm with you on that one , once I get the airbag on I will post some pics.

[Goatman]

Now we have to find someone to try it on their Gen 2!

[cubican]

Now we have to find someone to try it on their Gen 2!

It will work on a gen 2 but the Gide key needs to be filed down.

[PaulP]

Nice project! looks good

[gerch85]

Looks great.

[swolff]

Looks amazing. I think some blank CF panels like you mentioned for the elecs. would fit perfectly. If you don't mind me asking what did the Gen 5 wheel set you back?

[cubican]

I got more coin than brains, if you want to know send me a pm.

[Voice of Reason]

It's amazing how a good steering wheel can entirely change the look and feel of an interior.

[Speedy G]

I have wanted that steering wheel since i first seen it and I now want my gages painted on the inside!

[V10LEE]

I like the fatter steering wheel on my Gen V too.I might do this to my ACR.. Nice work..

[cubican]

Once I get the air bag in I will take better pics of the cluster and wheel.

[BAD BOYZZ GARAGE]

Nice project.. post update pics for all to see

[AbsolutHank]

Once I get the air bag in I will take better pics of the cluster and wheel.

Great! Excited to see the look

[No hemi]

subscribed, lmk when you decide to sell the one w the carbon fiber and how much, i'm interested.

[MtnBiker]

What does a gen III wheel look like? I dig the Gen IV wheel and would not change it.

[cubican]

same as the gen 4 but trust me there is a big diference from a gen 3/4 to a gen 5. pic of the carbon fiber wheel gen 3/4

IMG_0106.jpg

[No hemi]

Ohh yeah that looks SWEETT!!!

[cubican]

Ok got an update, the wheel works great the gen V airbag works with the gen3/4 conectors the only thing that I had to do extra for the horn to work on the genV is gounded on the harness and on the gen 3/4 is grounded to one of the bolts to the air bag simple fix. I just cover the the button with some 3m dinoc for now till I get ready for the carbon fiber work. some pics of the 3 wheels on the car.

IMG_0692.jpg IMG_0106.jpg IMG_0397.jpg IMG_0394.jpg

The first pic is the alcantara, then carbon fiber and the last 2 are the genV. I love the way the gen v wheel feels and looks so much better than stock. for the next step is making the gen V wheel out of carbon fiber.

[ACRucrazy]

Love the V wheel! Looks great!

Now to find that money tree.... I am not sure I want to know what a stock wheel/airbag cost..

[FrgMstr]

Sweet work Pedro! Thanks for sharing the information!