GTS Stripe Measurements?

[genVer]

I'm getting ready to have my new GTS wrapped with vinyl stripes and want to be sure they get the dimensions correct. I was wondering if there is a GTS owner who would be willing to take some measurements of their stripes so I can provide them to the shop as a go by. Thanks in advance!

UPDATE: I found a GTS with stripes at a local dealership and have taken the necessary measurements. Just in case anyone else is considering the same, I have placed the dimensioned drawings in the how-to below.

http://driveviper.com/forums/threads...ipe-Dimensions

[JonB ~ PartsRack]

The Year Matters

97-2002

97-02:

8" wide stripes with a 4 3/8" gap between


Metric? 97-02 has 203 mm stripes with 112 mm gap between them


TRIVIA: 96 GTS stripes were a bit different than all other G2

You mention VINYL. Chek out www.autodrimdesign.com

[genVer]

Thanks for the reply JonB. I have a 2013.

The Year Matters

97-2002

97-02:

8" wide stripes with a 4 3/8" gap between


Metric? 97-02 has 203 mm stripes with 112 mm gap between them


TRIVIA: 96 GTS stripes were a bit different than all other G2

You mention VINYL. Chek out www.autodrimdesign.com

[AZTVR]

You mention VINYL. Chek out www.autodrimdesign.com

Looks like you had a little misspelling that resulted in a broken link, Corrected: http://www.autotrimdesign.net/

Have you used them? They look like a very skilled shop with lots of custom product. I also followed a link to their Youtube channel showing lots of their capabilities.
https://www.youtube.com/user/AutoTrimDESIGN/videos

[genVer]

I found a GTS with stripes at a local dealership and have taken the necessary measurements. Just in case anyone else is considering the same, I have attached the dimensioned pictures to the original post.

[ViperSmith]

nice!

[bluesrt]

autotrim desigh does the stripes for viperstore, and they usual copy the stripes off a real car to factory specs.

[genVer]

I see them now! I was looking under "decals" instead of "graphics". That being said, I'm having the entire car wrapped so gonna let them handle the how.

autotrim desigh does the stripes for viperstore, and they usual copy the stripes off a real car to factory specs.

[ViperSmith]

what kind of design / colors you going with?

[genVer]

I'm wrapping it like the GT3-R race car (minus the rear wing and text graphics of course)

http://www.digitaltrends.com/wp-cont...R013_095MO.jpg
http://www.digitaltrends.com/wp-cont...iper-GT3-R.jpg

what kind of design / colors you going with?

[bluesrt]

Looks like you had a little misspelling that resulted in a broken link, Corrected: http://www.autotrimdesign.net/

Have you used them? They look like a very skilled shop with lots of custom product. I also followed a link to their Youtube channel showing lots of their capabilities.
https://www.youtube.com/user/AutoTrimDESIGN/videos

I have used them, top notch people, I have the fang stripes on my blk t/a, I called mike at autotrim , 2 days later he had the stripes copied of a real viper at a dealer. great people

[JonB ~ PartsRack]

I may have sent BlueSrt there too. SORRY about the typo, and thankz AZ for the fix.

Use with confidence at fair and reasonable prices......

[Voice of Reason]

If mine was white that's exactly what I would do. Post pics when you're done!

[genVer]

I'm planning to have some "professional" photos taken after it's completed and will certainly post them up.

If mine was white that's exactly what I would do. Post pics when you're done!

[bluesrt]

I may have sent BlueSrt there too. SORRY about the typo, and thankz AZ for the fix.

Use with confidence at fair and reasonable prices......

yes you did ! you allways have great advise!

[genVer]

I'll create a new thread once I have some decent pictures taken but here's a quick peek at how it turned out.
IMG_0285[2].jpg

If mine was white that's exactly what I would do. Post pics when you're done!

[Nambo]

That looks fantastic!

[gerch85]

looks great

[ViperSmith]

crap that looks good. can you post up what kind of vinyl was used?

[genVer]

Thanks guys. The shop I went to did an amazing job. I'm gonna create a build thread once I get all the pics and video from them. They used Avery vinyl.

[bluesrt]

wow that's killer lookin, now you need some black vapor sidewinder 2 wheels

[genVer]

That's what she's wearin' now Chomping at the bit to get some good pictures taken to post up. Main thing holding me up is I was unsuccessful with getting the new splitters installed I purchased from Jetstar. Gonna give it another shot soon.

wow that's killer lookin, now you need some black vapor sidewinder 2 wheels

[Voice of Reason]

That's amazing. I'm officially jealous.

One question, how do you see out the windshield? Without those top few inches I wouldn't have a chance of seeing stop lights change.

[genVer]

I'm short lol

Seriously though, I do have to duck my head down to see stop lights if I'm the first car but other than that, my vision isn't restricted at all.

That's amazing. I'm officially jealous.

One question, how do you see out the windshield? Without those top few inches I wouldn't have a chance of seeing stop lights change.