Sound deadening Project on 08 Viper

[drasch21]

So long story on why i stumbled in this project.

Previous owner(s), took some real bad short cuts for installing an after market amp/subwoofer. Ive noticed how poor the wiring job was(butchered), and figured one day ill get around to doing it right and while repairing/fixing it, i might as well sound deaden the car to improve road noise.

Heres a list/pictures of the "joy"...

to start the list of destruction.... they absolutely butchered the stock wiring harness(that plugs in the amp), Drilled screws into the trunk, drilled a 1inch hole through the trunk floor to get to the battery to run the power/ground, didnt remove old wires from another custom sound system?, didnt tuck wires properly(carpet on passenger side had a lump in it)

Heres a snapshot of the mess under the passenger seat

IMG_2534.jpg

Wiring nest running to the radio

704244466.jpg

Wiring nest in the trunk

704244482.jpg

Wiring nest partially removed

704244455.jpg

Wiring nest fully removed...

704255448.jpg