Hello,
I'm hoping someone out there upgraded their ACR Extreme front splitter winglets to carbon fiber and is willing to part with the stock take offs. I actually only need the driver's side. Attached is a pic of my passenger side. Thanks!
-Paul
Results 1 to 14 of 14
Hybrid View
-
12-19-2022 #1Enthusiast
- Join Date
- Oct 2022
- Posts
- 4
Need a ACR Extreme Aero front splitter winglet
-
12-20-2022 #2Enthusiast
- Join Date
- Sep 2017
- Location
- NJ
- Posts
- 251
I am also looking for a set of these to buy or to borrow and return after I model them.
-
12-20-2022 #3Enthusiast
- Join Date
- May 2014
- Posts
- 128
I 3D printed a small batch of those. I will post pictures in a few hours. The texture is slightly different but not too far off. Plus you only see the side.
-
12-20-2022 #4Enthusiast
- Join Date
- Oct 2022
- Posts
- 4
Not too worried about the texture as the front edge of the splitter extension is different as well. Is it possible to forward the 3D cad model so I can print myself?
Thanks,
Paul
-
12-21-2022 #5Enthusiast
- Join Date
- Oct 2021
- Location
- Raleigh, NC
- Posts
- 18
jwalk Any chance you are able to 3D print the TA1 front splitter? I'm not wanting carbon and that is all I can seem to find are carbon options.
Originally Posted by jwalk
-
12-21-2022 #6Enthusiast
- Join Date
- May 2014
- Posts
- 128
No, I typically dont do 3D printing but this was something I needed for my ACR-E. Originally Posted by bmxbandit
jwalk Any chance you are able to 3D print the TA1 front splitter? I'm not wanting carbon and that is all I can seem to find are carbon options.
-
12-21-2022 #7Enthusiast
- Join Date
- Oct 2021
- Location
- Raleigh, NC
- Posts
- 18
no worries! thanks for the reply! Originally Posted by jwalk
-
12-20-2022 #8Enthusiast
- Join Date
- Dec 2013
- Location
- CANADA
- Posts
- 599
I could use new ones as well. A bit of a wearable item IMO.
-
12-20-2022 #9Enthusiast
- Join Date
- May 2017
- Posts
- 83
If you find a pair reasonably priced I’ll split it and take the passenger side one. Or if we can find a nice 3D set I’ll split.
-
12-20-2022 #10Enthusiast
- Join Date
- May 2014
- Posts
- 128
-
12-20-2022 #11Enthusiast
- Join Date
- Oct 2022
- Posts
- 4
Those look awesome. Is it possible to forward the 3D cad model so I can print myself or are you willing to sell a set?
-
12-20-2022 #12Enthusiast
- Join Date
- May 2014
- Posts
- 128
I will sell them for $155 including shipping per set. PM me. Paypal
-
12-21-2022 #13Enthusiast
- Join Date
- Feb 2015
- Location
- Paradise Valley
- Posts
- 5,481
Nice work Jwalk!
-
12-21-2022 #14Enthusiast
- Join Date
- Sep 2014
- Posts
- 1,798
Doug Shelby sells these in a carbon fiber version.
https://www.dougshelbyengineering.co...itter-winglets
Reply With Quote
Bookmarks