Oil Cooler line replacement

[drasch21]

Any write ups on this or anything i should know?

I noticed the leaks and ordered the parts but havent had the car up in the air to see how to replace them etc.

[dreamcarviper]

If you have a lift it will be a lot easier. If you remove the pan it will be even easier.
Getting the new lines to line up is going to be a challenge with the pan on but manageable.
Check out this thread.
https://driveviper.com/forums/thread...acement-Gen-IV

[Zubik]

I did mine w/the pan on. I did it when I needed to change the oil; the oil filter has to come off. I followed the write up. Only specialty tool I need to acquire was a smaller thinner adjustable crescent wrench.

[efnfast]

it's pretty easy, even easier if you have a lift. You don't need to remove the pan. If you use stainless braided hose rather than the nylon braid like startlite make sure to wrap it - stainless braid likes to chew on anything it comes in contact with

[bmxbandit]

I documented the replacement of my oil cooler lines when I replaced them on my channel...

[Mikey]

I documented the replacement of my oil cooler lines when I replaced them on my channel...

Hey boss, it's White Jodeci on youtube. Glad to see you on the forum!