Anyone have pics of what the 3/8 or 5/16 wheels spacers look like on the 3 spoke gen 1 OEM wheels? I'm debating if it would better line up the wheels to the body but can't seem to find any pictures on the net.
http://www.viperpartsrack.com/wheel-...?keyword=wheel
Results 1 to 9 of 9
Thread: Wheel spacers on Gen 1
-
04-16-2022 #1Enthusiast
- Join Date
- Oct 2020
- Location
- Boise ID
- Posts
- 16
Wheel spacers on Gen 1
-
04-17-2022 #2Enthusiast
- Join Date
- Aug 2016
- Location
- Behind Dave since he only brakes at 95%
- Posts
- 220
Why? Spacers bigger problems. Stick with what was engineered correctly
-
04-17-2022 #3Enthusiast
- Join Date
- Oct 2014
- Location
- Driving around with contaminated fluids braking at 95% while squirting WD40 in people's locks
- Posts
- 3,036
If you want to do a cheap driveway test use some 1/2" flat washers between the wheel and hub. Just don't actually move or drive it like that. It will be fine to set it back down to load the suspension as long as you tighten the lug nuts.
-
04-18-2022 #4Enthusiast
- Join Date
- Apr 2016
- Location
- Carroll, Iowa
- Posts
- 110
I have wondered the same
-
04-21-2022 #5Enthusiast
- Join Date
- Mar 2022
- Posts
- 22
following......
-
04-22-2022 #6Enthusiast
- Join Date
- Oct 2013
- Location
- North Carolina
- Posts
- 1,361
Car is on the lift with hood popped, but may give you some idea. These are 3/8 spacers and extended lug nuts obtained from Mark at IPSCO.
96D83229-FFEC-4B21-A5D4-91A6B5475609.jpg
-
04-22-2022 #7Enthusiast
- Join Date
- Oct 2013
- Location
- North Carolina
- Posts
- 1,361
3FAD0AF4-DA39-43BF-BA63-035FCB34DCDD.jpg
- - - Updated - - -
D7E48E34-2FB5-4AAF-BEF4-9766EF0D497E.jpg
-
04-22-2022 #8Enthusiast
- Join Date
- Oct 2013
- Location
- North Carolina
- Posts
- 1,361
-
04-27-2022 #9Enthusiast
- Join Date
- Apr 2016
- Location
- Carroll, Iowa
- Posts
- 110
The Stryker reflection in your door is kind of a cool unintended image.
Reply With Quote
Bookmarks