Gen IV ACR Strip dimensions

[Exhlr8n]

Hi,

I searched site but couldn't find Gen IV ACR Strip dimensions. Anyone have them?

Looks like the hood, roof and deck lid are black with the Driver strip red or body color.

Thanks


download.jpgpictures_dodge_viper_2008_8_1280x960.jpg

Looked again and found this.
https://driveviper.com/forums/thread...hlight=stripes

[str5010]

I don't have the dimensions Tom but if memory serves the only color available for the driver's stripe was red. That was only available on certain colors as well. I know it wasn't available on my venom red for example.

[commandomatt]

I don't have the dimensions Tom but if memory serves the only color available for the driver's stripe was red. That was only available on certain colors as well. I know it wasn't available on my venom red for example.

I have seen a SSG/Black with SSG stripe. Also Yellow/Black with Yellow stripe

[str5010]

Ah that's true enough on the special edition cars at the end of production. I totally forgot about them. Were there any done though in 2008/2009?

[Exhlr8n]

I've seen a few GTS Blue, and Purple Gen IV ACR's too. Don't remember if they had the Body Color Driver stripe though. The forum link does have the dimensions. I'll probably just try a wrap 1st and see if I like it.

[13COBRA]

I've seen a few GTS Blue, and Purple Gen IV ACR's too. Don't remember if they had the Body Color Driver stripe though. The forum link does have the dimensions. I'll probably just try a wrap 1st and see if I like it.

The dimensions on your CC will be a little different than the dimensions on the Gen IV ACR. The VCC is wider.

I'd take the main stripe from the inner corner of the headlights, to the outer corner of the bottom of the windshield. If you want a driver's stripe, I would just start it about 2" inside the big stripe, and take it straight back to the steering wheel.

The back should be easy.

Just show a picture to the person wrapping it. That's what I did and he recreated it.

[Exhlr8n]

The dimensions on your CC will be a little different than the dimensions on the Gen IV ACR. The VCC is wider.

I'd take the main stripe from the inner corner of the headlights, to the outer corner of the bottom of the windshield. If you want a driver's stripe, I would just start it about 2" inside the big stripe, and take it straight back to the steering wheel.

The back should be easy.

Just show a picture to the person wrapping it. That's what I did and he recreated it.

This is for my 2008 Roadster. I'm looking at turning it into a ACR/Vert. Just for fun on the street.

275260300_1257316241468232_4531907300992768912_n.jpg

[13COBRA]

This is for my 2008 Roadster. I'm looking at turning it into a ACR/Vert. Just for fun on the street.

275260300_1257316241468232_4531907300992768912_n.jpg

Got it!

If you take it to even a semi-capable wrap guy, he can duplicate it no problem.