I have had my 06 for about a year now. The passenger side exhaust tip was always too low and rested on the opening of the side sill. I have today off and decided to try and fix it. I was a little surprised at what I found. If your familiar with the gen III/IV, you know there are two bolts right by the tip that hold the rubber hanger in place. Well my upper bolt hole is clogged up with some sort of metal. I have a couple options on how to fix it, so wish me luck.

Plan one is to drill out all the metal (it appears to go all the way through the hole) and tap the hole bigger and buy a new bolt.

Plan 2 is to drill a completely new hole above the existing crappy hole and run a new bolt. The only problem there is I don have much real estate on the hanger for new holes.

Plan 3 is my last choice. Grind off the u shaped u shaped piece of metal and replace the sliding piece that the holes are in. Then I would have to re-weld the u shaped piece back. I don't have a welder and this is a little out of my comfort zone.

If anyone has encountered this before, please chime in on how you fixed it.