Exhaust bezel seals

[Sniper]

Are the seals that go on the back of the exhaust bezels sill available?
And if so, from where?

9388D0D5-8C37-40C4-BAB0-843A303ADD15.jpg

[SLYBRI]

Mopar doesn’t list any discrete seals for the exhaust bezels, however the bezels themselves are still available (5SR73AAAAA - left & 5SR72AAAAA - right). As an alternative, it might be worth checking Lowes/Menards/Home Depot for a high temp rated foam or mastic sealant.

[Sniper]

I could trace out the shape of these and cut new seals.
Does anyone know exactly what kind of material I would need for these seals. Rubber, silicone hi-temp?
Would this work with the high temps on the exhaust bezels?
https://www.amazon.com/Silicone-12x1...1411952&sr=8-1

[Steve M]

I could trace out the shape of these and cut new seals.
Does anyone know exactly what kind of material I would need for these seals. Rubber, silicone hi-temp?
Would this work with the high temps on the exhaust bezels?
https://www.amazon.com/Silicone-12x1...1411952&sr=8-1

I wouldn't be ordering anything off Amazon for something like this.

Maybe try starting here: https://www.mcmaster.com/high-temperature-gaskets/

[Sniper]

The seals that were on it were a rubber type material. They’re not metal.

[Steve M]

Plenty of rubber materials on the page in the link above.

[Sniper]

Was able to buy these from Scott @ Prefix.

Scott, if you’re out there, thank you!!!