What size stainless mesh for the front facia Radiator screen?
Stainless 5 wire mesh, 10 wire?
Thanks
What size stainless mesh for the front facia Radiator screen?
Stainless 5 wire mesh, 10 wire?
Thanks
Last edited by Exhlr8n; 08-17-2021 at 11:44 PM.
A US Standard #5 stainless mesh has a 4mm square opening. A #10 mesh is only 2mm. I'd recommend the #5 at a minimum.
Last edited by GTS Dean; 08-18-2021 at 10:36 AM.
Thanks, I was leaning towards #5
Wondering what size screen the Comp Coupes usually came with, #3, #4 #5?
#4 mesh (4.75mm or just over 3/16") is an extremely common standard opening. 10 mesh is also very common. If you can find #5, it will be either a custom order at high price, or you may get it on a closeout deal because nobody buys it and they are trying to clear inventory. Above the #4, you will find screen openings in 1/16", then 1/8" opening increments. Wire diameter becomes a consideration based on expected duty and wear.
Opening selection for racing depends on these main variables:
Are rocks, pebbles and racecar debris your main concern? Go with bigger openings.
Is fine sand plugging your fins? Go with smaller openings, but the fine mesh can cause airflow restrictions.
Last edited by GTS Dean; 08-18-2021 at 12:12 PM.
I just replaced mine with #4 and has worked fine.
Thanks guys, I'll go with #4
Bookmarks