Pre mixed coolant

[ek1]

Owner's manual states "We recommend you use MOPAR Antifreeze/Engine Coolant (OAT coolant conforming to MS.90032) 10 Year/150,000 Mile Formula or equivalent)." However, that coolant requires mixing with distilled water.

If I want to buy pre-mixed coolant, is this OK? https://www.amazon.com/Mopar-Year-Mi.../dp/B017DP43ZC

[usmcfieldmp]

That seems to be the one. That price is almost $10 higher than I've seen anywhere else. Try this: https://www.moparwholesaleparts.com/...-50-68163849ab

[Bryan Savage]

Yep. Go ahead and use it.

Found this on the Wrangler forums. According to this single datapoint, with zero other research, this person discovered they just changed the number. https://www.wranglerforum.com/thread...90032.1942898/

My owners manual says I should use MS-12106.

I wouldn't hesitate to use whatever Mopar pre-diluted 10-year mix I could get. As long as you aren't mixing 3-year with 10-year, or using Evanscool or something strange, roll with it.

[ek1]

That seems to be the one. That price is almost $10 higher than I've seen anywhere else. Try this: https://www.moparwholesaleparts.com/...-50-68163849ab

Awesome, thanks. The price is misleading. This web site charges $22.89 (yes, not a typo) for shipping, so the grand total will actually be much higher than Amazon (which has free overnight shipping).

[usmcfieldmp]

Sure, but I wouldn't order coolant online unless I was getting a hell of a deal. Have you checked with a local dealer?

I only say that because you're going to be paying $12 for half a gallon of water.