ACR Diffuser

[SRTGill]

Hello all!

I've followed some posts and seen there is a kit offered for a ACR diffuer on non ACR models. Its still quite the penny, around $4500 without shipping. I have linked up a with a buddy of mine who makes custom splitters, diffusers etc and we would like to make some cheaper options. Instead of carbon fiber, ABS plastic. Trading weight for expense, I get it but not looking to track my GTS, just want the looks.



Would anyone be willing to share dimensions of their strakes/brackets? Perhaps close up photos of the setup underneath. Appreciate any help, thanks

[Lawineer]

If you just want the looks, just buy the strakes on ebay for $400.

[Whiskey]

Vipertoad on this board sells them for a something like $350 + shipping.

I'd personally like the ABS ones. The extra weight of maybe 1/2lb is in the best possible place lol. Also when I scratch them up they are probably cheap enough I wouldn't care. Same with a side spitter and front splitter; I'd like something inexpensive as it's a sacrificial part.

[MoparJohn]

ACR-ISH has a kit for 1500 or so that is a replica of the ACR one. Not just the strakes, but the trays as well.

[Viperenvy]

Good to see the feedback here on the VOA.

[Lawineer]

Vipertoad on this board sells them for a something like $350 + shipping.

I'd personally like the ABS ones. The extra weight of maybe 1/2lb is in the best possible place lol. Also when I scratch them up they are probably cheap enough I wouldn't care. Same with a side spitter and front splitter; I'd like something inexpensive as it's a sacrificial part.

Some race cars use literal plywood.

Trace splitter (or whatever shape you want). Drill holes. Sand to make pretty (and whatever else you care to do). paint.

It will weigh a good bit more than your carbon splitter, but it's a hell of a lot cheaper.

I think they use acrylics too. Not 100% sure on that.

I'll probably do it with wood for this car once ACR-ISH starts making the kits.
I'll probably make and make an extension so I can have two lengths.

If you're really picky about weight and want it quick and easy, you could always make your own out of carbon/kevlar/whatever and just paint. It's a little more work to make the mold and then drill/trim everything, but once you had the mold made, it's probably $200 in fiber and epoxy and 3 hours of work.

[Whiskey]

Years ago I made some CF parts for the Gen1-2. Center console specifically. 10k Twill in the bottom and 3K twill on top. I was sick of the ugly console and the cheap plastic/pvc junk kept breaking. I don't have a Gen2 anymore but I still have the first one I made that wasn't a pile of crap. Lol. I made matching knee bolsters too but only used 1 layer of 3k it was stupid light felt like paper. I used hydro forming for my parts to keep the air out and make a very nice finish without the use of multiple coats of clear. I later sold the "company" as it wasn't making a ton of money and my Engineering job was (and still is) paying the bills.


I'd love start making parts again but I really don't have time.

[SRTGill]

Thank you guys, I was able to find ACR_ISH thread and reach out!

[TheWessss]

I have a spare OEM ACR-E diffuser that is already off the car

[GTS-E]

I have a spare OEM ACR-E diffuser that is already off the car

PM Sent

[SRTGill]

I have a spare OEM ACR-E diffuser that is already off the car

Copy that, very interested PM sent

[TheWessss]

Guys, I am just getting back to the forums. I had 4 owners that PM me already that day. I will take the highest offer. To be super clear, the diffuser is the piece that the strakes attach to, even better it is the large boomerang shaped piece that houses the reverse lights (which have been removed from mine). You can buy those strakes OEM or from Doug Shelby engineering. The part is located in South Florida, so it would be very convenient to be picked up during the NVE4 event. Shipping might be a bit pricey because of the size.

[SRTGill]

Hello All, huge thanks to Dennis for supplying measurements for all of the pieces. I was able to get a rough template going. Attached is a YouTube link of how it looks so far. I think it's pretty decent considering it's from scratch https://youtube.com/shorts/A2humRAYCW0

[TheMadMachinist]

Nice work the thing looks great.

You wouldn't happen to have made an extra one you would be interested in selling.

[SRTGill]

Yes, I will be wrapping things up this week and will release the final look. I plan on making numerous of these, and will be made available to the forums. I'll scrunch up the numbers and provide more info

[SRTGill]

Alright guys, have it all done up. The brackets will be in all black, I just wanted to see how everything fit underneath. Ide say to the naked eye and non OCD viewer, its spot on. Will be weighing all the parts to get an exact weight to see how much I have to lose Screenshot_20210406-161151_Instagram.jpgScreenshot_20210406-161144_Instagram.jpg

[SRTGill]

Updated with final touches
Screenshot_20210406-212552_Instagram.jpg

[SRTGill]

More pictures, different angles
Resized_20210407_133314.jpgResized_20210407_133322.jpgResized_20210407_133332.jpgResized_20210407_133346.jpg

[Sniper]

I’m curious as to what the price will be for this?

[SRTGill]

$1200 + shipping

[SRTGill]

Some more pictures, definitely like how it came out IMG_20210409_083922_269.jpgIMG_20210409_083922_253.jpg

[SRTGill]

Kits have been made, if you would like to order can place on below link:

https://fittedracing.bigcartel.com/p...style-diffuser

[Arizona Vipers]

Kits have been made, if you would like to order can place on below link:

https://fittedracing.bigcartel.com/p...style-diffuser

Insane pricing man! Total bargain.

[SRTGill]

Thank you, just wanted to have an affordable option out there that still meets OEM looks. Appreciate the support

[gpbtt]

Any updates on delivery of these?