belanger header install

[drasch21]

Hey guys working on finishing up header/hi flow cat install on my 08....

Anyone have any pictures of how they routed the extended O2 sensors? instructions say to route them in the drive shaft tunnel and i just cannot see how that is done....

2ndly,

i forgot to mark which sensor plug goes where on the car. Any of have any pictures or clarification?

Thanks!

[Steve M]

I can't really provide any help here, but this thread has a lot of pics from a Gen 5 that might help get you going in the right direction:

https://driveviper.com/forums/thread...hoto-intensive

I know on some of the more recent Gen 5 Belangers, he put the secondary O2 sensor bung right near the exhaust tip. For that one, I could see needing to route the extension harness down the drive shaft tunnel. If your secondary O2 sensor bungs aren't by the tips, I'd say ignore that one.

[Steve M]

And to illustrate, here's a post that shows how they were before: https://driveviper.com/forums/thread...l=1#post422517

And here's a post that shows how they come now: https://driveviper.com/forums/thread...l=1#post422837

Again, those are Gen 5s, but that might be the source of the confusing instructions.

[drasch21]

I can't really provide any help here, but this thread has a lot of pics from a Gen 5 that might help get you going in the right direction:

https://driveviper.com/forums/thread...hoto-intensive

I know on some of the more recent Gen 5 Belangers, he put the secondary O2 sensor bung right near the exhaust tip. For that one, I could see needing to route the extension harness down the drive shaft tunnel. If your secondary O2 sensor bungs aren't by the tips, I'd say ignore that one.

yea they are directly after the cat thats why i couldnt understand the instructions and the 02 sensor extensions are insanely long...

[Steve M]

Yeah...that sounds like a case of a product revision that doesn't apply to yours. Someone should send you extensions that are the correct size for your exact setup. Not sure who you ordered them through, but I'd be sending an email or making a phone call.

[drasch21]

Yeah...that sounds like a case of a product revision that doesn't apply to yours. Someone should send you extensions that are the correct size for your exact setup. Not sure who you ordered them through, but I'd be sending an email or making a phone call.

they came straight from belanger... guess ill give lou a call.

[Steve M]

If you want to have a good conversation, tell him you'd like to run a wideband O2 sensor in your exhaust.

[drasch21]

If you want to have a good conversation, tell him you'd like to run a wideband O2 sensor in your exhaust.

already had quite the discussion when i asked him if the headers would cause me to fail emissions...

[drasch21]

scott from roe and lou from belanger got me sorted out! turns out i still have my own dumbass moments !