Trying to close hood/bumper gaps on side. I’ve lowered the hood latches as much as they’ll go. It is my understanding that I would need to shim the radiator support upwards to help with the gap.
What is the Dodge part number for the shims? Or can I get away with Home Depot plastic horseshoe shims?
Results 1 to 5 of 5
Thread: Shims for radiator support
Hybrid View
-
02-05-2021 #1Enthusiast
- Join Date
- Jan 2019
- Posts
- 9
Shims for radiator support
-
02-06-2021 #2VOA Member
- Join Date
- Oct 2013
- Location
- Banned
- Posts
- 3,325
You can get away with the HD shims
09 ACR With all the goodies
99 ACR TT 99 red RT/10 Roe S/C
97 B/W RT/10 TT 94 RT/10 TT
-
02-06-2021 #3Enthusiast
- Join Date
- Oct 2014
- Location
- Driving around with contaminated fluids braking at 95% while squirting WD40 in people's locks
- Posts
- 3,036
4709367AB
BTW, good luck. As the guy that has written the most complete procedure on the Gen 2 front end assembly and alignment, you are going down the path of making one thing good while making others worse. There are a lot of hidden dynamics in the way those parts all go together that cause that effect. And if along the way of adjustment you don't address the poor factory fastening methods used at the CAAP, it makes it even more work and less successful in the end.
-
02-06-2021 #4Enthusiast
- Join Date
- Oct 2013
- Location
- South of London, Surrey
- Posts
- 7,577
-
02-18-2021 #5Enthusiast
- Join Date
- Jan 2019
- Posts
- 9
Ok thanks for info
Reply With Quote
Bookmarks