Powdercoating Sidewinder 2 Wheels

[bluesrt]

It's a cohrgi, I get the model number tomorrow

[BJG32]

I have the actual hyperblack coating.

Airbrush then clear coat over the damaged area. Looks great!

[ViperGeorge]

I have the actual hyperblack coating.

Airbrush then clear coat over the damaged area. Looks great!

Where did you get the Hyperblack coating. I have a set of SWIIs with that finish in addition to the black ones I have.

[BJG32]

Where did you get the Hyperblack coating. I have a set of SWIIs with that finish in addition to the black ones I have.

http://www.motostorm.com/

[bluesrt]

my tire machine is a rotary 1150 series, does not touch the wheel what so ever, cannot damage wheel /////// thought it was a cohrgi, that was my old one

[ViperGeorge]

http://www.motostorm.com/

Thanks but what is the exact color you ordered? Hyperblack? Their pictures of it look blacker than what is on the Viper wheels.

[BJG32]

Thanks but what is the exact color you ordered? Hyperblack? Their pictures of it look blacker than what is on the Viper wheels.

Yes, their hyperblack is exactly what i ordered.

[Gen5snake]

my tire machine is a rotary 1150 series, does not touch the wheel what so ever, cannot damage wheel /////// thought it was a cohrgi, that was my old one

Thanks!! Nice machine https://vimeo.com/205236513

[bluesrt]

impossible to mark a wheel, done hundreds without one problem

[AAA96]

Thanks for the input and help. Wheel/suspension project complete. Will post more pics when I take them, but here is a quick one. 624C576F-A31A-4710-AEC0-B7AA40A988A0.jpg

[Lawineer]

Make sure you get a low temp oven. From my understanding, the wheels are designed to be super light. That means there isn't a ton of margin in them. There's a lot of discussion about low temp PC and whether it weakens forged wheels or not. High temp ones are obviously pretty dangerous.
This probably isn't your daily driver, so maintenance shouldn't be that big of a deal. Just go paint.

[AAA96]

Make sure you get a low temp oven. From my understanding, the wheels are designed to be super light. That means there isn't a ton of margin in them. There's a lot of discussion about low temp PC and whether it weakens forged wheels or not. High temp ones are obviously pretty dangerous.
This probably isn't your daily driver, so maintenance shouldn't be that big of a deal. Just go paint.

Doesn’t seem to be an issue so far.

[Lawineer]

You probably won't notice unless you hit a pothole (or curbing at the track), etc.

[AAA96]

You probably won't notice unless you hit a pothole (or curbing at the track), etc.

Point taken. It’s a street car so if I hit a pothole that a 355 or 295 can fit in, I’m probably in serious trouble anyways.

[Lawineer]

Point taken. It’s a street car so if I hit a pothole that a 355 or 295 can fit in, I’m probably in serious trouble anyways.

Or just passing through Dallas.