TA to ACR conversion

[SSGNRDZ_28]

The end plates have the vented bumped out ,doesn’t the flat side face out?
Attachment 46889

You are correct and so is your installation. The purpose of the vents is to allow air to escape from inside the wing structure.

[simon455]

So person that appears to stand behind this company clarified that he’s aware of that incorrect install of the side plates on the web pics as it was pointed out here. Waiting for close up pics of the next upcoming wing that’s in progress. Says they had sold around 10 of them, wonder if anyone on here got one or know someone that bought one. Or any other experience with their work on other brands perhaps.

[XTREME SUPERCARS]

Anyone care to share the price list from Xtreme. I reached out to them but no luck.

Hey There!
It's Laurelle from Xtreme.

Dennis, you have done a remarkable job on the descriptive instructions for installing our parts. We usually recommend Dan Brehmer
for installation and paint, But, we just might start you in a little side hustle installing our parts.
your car looks awesome!

There were a few questions I would like to answer.

Our parts are tested extensively on many road tracks and high speed. straight line aero proving grounds at speeds over 225mph.
Our 2013 test car has been driven TO detroit, run at Chelsea proving grounds, Johnny Bohmer Proving grounds at Kennedy Space Center,
Sebring, Road Atlanta, Roebling, VIR, NOLA, PBIR and COTA.
Many of our parts can be interchanged/ exchanged with OEM. The CF we use is American made,
woven as close to OEM as possible. Not exactly, but close enough.

We set up a sale for Father's Day last year and released the price list in May of 2020, Then Covid hit..
A lot of people and their businesses were affected. We opted to keep the sales prices through the rest of 2020.
After Christmas, we decided to keep the 2020 sales prices the same through Father's day 2021.
Our website was hacked a few years ago and being so busy with our Aviation parent company, never addressed it.
It is something we will at least try to get back into and at the very least have a page that will open to redirect
to another small one, or a link to send us an email request.
We have a Facebook page where a lot of people have posted photos/videos of our parts on their cars. We also have a few
of our own videos and pictures. Please, like and visit, share your pictures.

If anyone is interested in a current sales sheet, or if you may have any other questions,

Please email me at
XtremeSupercarsInc@Gmail.com

Please be patient. The Viper parts are a small aspect of our Aviation business and our composite department
builds these parts during slow times.
We don't take any money for non customized parts until they are boxed up ready to ship.
Right now, we have a backlog of orders for the complete ACR-E Aero kit.
But we are getting them out within about 3-4 weeks.

Thank you all that have supported our business and purchased parts.
We look forward to selling you all more parts and seeing pictures your cars sporting them.

- Laurelle Balog
and
Wayne Garner

[Bruce H.]

Thanks for the information, Laurelle. Great parts quality and service. Stay well.
Bruce

[Hawk]

Mark
Where in Laurelle’s post does it say that? What is so confusing for you the middle of page 2 of this post is a link to the price sheet? Have you been unable to contact Xtreme Supercars? They responded back to every email I sent within hours and they usually pick up the phone on every call.
What is your point?

[TA Two Oh]

I had a wonderful sales experience with Laurelle and Wayne. Responsive service, and the items that I received were of the highest quality. They have been on my car for almost 6 years now and they've held up beautifully; in fact they look exactly the same as when I unboxed them. I highly recommend Xtreme Supercars.

[Pappy]

Does anyone know anything about Aero Republic and this wing? I apologize if I missed a post about it somewhere.

https://performancespeedshop.com/pro...smart_campaign

Pappy

[nwa_viper]

Communications have always been great with Xtreme. Only issue I’ve had is the parts I’ve wanted they only sell to dealers or “professional” installers so I’m forced to buy OEM instead.

[Arizona Vipers]

I've always had good luck with Xtreme. Great products, fast shipping

[SLP]

Does anyone know anything about Aero Republic and this wing? I apologize if I missed a post about it somewhere.

https://performancespeedshop.com/pro...smart_campaign

Pappy

The Vipers Owners Group facebook group has some info if you search "aero republic" in it. Both the manufacturer and some customers chimed in on their most recent post. Looks like a good lower cost option to me.

[simon455]

managed to get hold of one of the purchasers, he just put one on his car, stated that waited long time but product finish and quality is excellent. Still winter up there so no track time. From the conversation he’s not new to racing or tracking. Wonder where few of the other sold wings went to?

[Mark1107]

Sorry. You’re right I was being lazy. I didn’t read page 2.

7869495C-C035-414E-8B8F-13241A474165.jpg

Mark
Where in Laurelle’s post does it say that? What is so confusing for you the middle of page 2 of this post is a link to the price sheet? Have you been unable to contact Xtreme Supercars? They responded back to every email I sent within hours and they usually pick up the phone on every call.
What is your point?

[Hawk]

I found this low profile ratchet wrench for removing the front splitter extension on Amazon for $16. Does Dodge give a low profile wrench with the ACR?
Amazon.com: KAIFNT K451 Ultra Low Profile Screwdriver Bit Set with Mini Ratchet Wrench, 1/4-Inch Drive, 23-Piece: Home Improvement


P1015419.jpg
P1015424.jpg
P1015430.jpg

[13COBRA]

That definitely would've saved my knuckles when I swapped out the splitter on my Gen IV.

[sharmut]

I found this low profile ratchet wrench for removing the front splitter extension on Amazon for $16. Does Dodge give a low profile wrench with the ACR?
Amazon.com: KAIFNT K451 Ultra Low Profile Screwdriver Bit Set with Mini Ratchet Wrench, 1/4-Inch Drive, 23-Piece: Home Improvement



P1015424.jpg
P1015430.jpg

Have you considered changing the Philips bolts to hex, so you can use a ratcheting box wrench.

[Hawk]

The heads are actually #25 Torx but it did occur to me that it would be much easier if they had a regular hex head. I just used the hardware that was sent to me.

[XTREME SUPERCARS]

Thanks for the information, Laurelle. Great parts quality and service. Stay well.
Bruce

You're very welcome
and thank you so much for the compliment
and stay well too..
Laurelle

[XTREME SUPERCARS]

Communications have always been great with Xtreme. Only issue I’ve had is the parts I’ve wanted they only sell to dealers or “professional” installers so I’m forced to buy OEM instead.

I'm very curious as to the source of this mis information.
While We do sell a majority of our our parts through Prefix, Parts Rack. Nth Moto, The Viper Store, Calvo Motorsports, Doug Shelby and Viper Exchange, We DO sell direct to private owners as well. We don't advertise, but get our business via our Vendors,Facebook, repeat private buyers and word of mouth
There ARE a few parts we have restrictions on due to the difficulty and complexity of installation and generally sell them
to body shops or dealers familiar with expert level in installing some parts on Gen V Vipers.
Feel free to email me if you'd like a current sales list and would be interested in buying our parts.
XtremeSupercarsInc@gmail.com
Thanks so very much
Laurelle

[nwa_viper]

I'm very curious as to the source of this mis information.
While We do sell a majority of our our parts through Prefix, Parts Rack. Nth Moto, The Viper Store, Calvo Motorsports, Doug Shelby and Viper Exchange, We DO sell direct to private owners as well. We don't advertise, but get our business via our Vendors,Facebook, repeat private buyers and word of mouth
There ARE a few parts we have restrictions on due to the difficulty and complexity of installation and generally sell them
to body shops or dealers familiar with expert level in installing some parts on Gen V Vipers.
Feel free to email me if you'd like a current sales list and would be interested in buying our parts.
XtremeSupercarsInc@gmail.com
Thanks so very much
Laurelle

1FC48483-B2DB-4AB0-A2B3-9B3FF7CC691A.jpg

[XTREME SUPERCARS]

This is one of the parts we do restrict selling.
I apologize that we wouldn't sell to you back then..

We did have the opportunity to sell a set, along with a rear applique to Luis V
He was nice enough to do a tutorial, much like Dennis did for our ACR-E parts, on installing
the Rear Brake ducts and the rear Applique'

We now share the links with potential customers, letting them know that we won't warranty the parts if cracked, damaged or
marred by improper installation. Some back out, deciding that it is a daunting task. Some are up to the challenge and understand the risk and potential for losing out on a good deal of money if they screw up.
I've included the tutorial links for the Appliques' and the Rear Brake Ducts Luis. V was kind enough to share on this forum.
Again, back when, we didn't sell these parts to the layman for this reason.
As you can see by these tututorials, including the ones Dennis posted in thos thread, These are not parts to be installed by someone with just a hand full of tools.

Thank you for sharing past correspondance
Laurelle
https://driveviper.com/forums/thread...672#post349672

https://driveviper.com/forums/thread...plique-Install

[XTREME SUPERCARS]

This is an old price list. We've added a few nice parts and some of the prices have changed.
I'm not sure how to add an attachment to post the current sales sheet
Email me
XtremeSupercarsInc@gmail.com and I'll be happy to share it, if someone would like to attach it to a future post
Thanks
Laurelle

[serpent]

OP, any pics of your progress?

[Hawk]

P1015440.jpg

[Hawk]

Having a hard time posting it correctly, when I tried to copy and paste it changed the format and jumbled it together

[XTREME SUPERCARS]

THANKS!