Anyone have a spare PCV grommet

[C5Longhorn]

I'm going to be changing the thermostat gasket and want to replace the pcv grommet.

Unfortunately, the Mopar part # 5245322, has been discontinued.

Anyone have any ideas on where I could source one (besides Dave's attic) or if there is a way to find a cross reference number? I heard this grommet is shared with Dodge V8's.

Thanks,

Rick

[Fatboy 18]

Have you tried Partsrack (JonB) or Chuck Tator, Tators Garage (formerly Tators Dodge)?

[C5Longhorn]

I plan reaching out to JonB. I didn't realize Tator stocked parts, thanks for the tip.

[dave6666]

I sent an email out. I'll let you know if I get any leads.

BTW, I outgrew the attic. I build a small warehouse. Please update your notes as such

[dave6666]

Okay got a reply back from my Mopar parts guy. No inventory at Mopar or dealers that use that system. Private inventories like Jon B or Tator are obviously outside of that realm.

[RyanLS.GEN2]

call JonB, i work for a company who has them instock, but we are not a board sponsor so i cant post it. But Jon B is partnered with us so you can get through him.

[JonB ~ PartsRack]

I plan reaching out to JonB. I didn't realize Tator stocked parts, thanks for the tip.

Have New Stock of this unobtanium, rare, as endangered as a Unicorn, Viper museum piece. Curated / stored on velvet.



jonb@partsrack.com

[USAFPILOT]

I was just looking for one to finish up my valve cover install, mine is literally crumbling. I sent you an email JonB.

[USAFPILOT]

Some available at OEM parts source also

[C5Longhorn]

I plan reaching out to JonB. I didn't realize Tator stocked parts, thanks for the tip.

Have New Stock of this unobtanium, rare, as endangered as a Unicorn, Viper museum piece. Curated / stored on velvet.



jonb@partsrack.com

Email sent.

Thanks,

Rick

[C5Longhorn]

Okay got a reply back from my Mopar parts guy. No inventory at Mopar or dealers that use that system. Private inventories like Jon B or Tator are obviously outside of that realm.

Thanks Dave, and noted you now have your own private warehouse of spares.

[dave6666]

I will note having recently put one in my engine that they it was a pain to install. I think it's designed for something thinner than the casting thickness at the top of that block.

On a related note tho I was looking on the web at PCV grommets and there are some similar looking ones out there. If I find a match to the Gen 2 one I'll post the p/n just in case Ryan and Jon run out.

[MH60M]

I have a spare but I chose not to use it. My car is far from “Concourse”. NAPA has one with the same dimensions and fits better than OEM. I’ve used it without any issues. NAPA Part # 630-1039. You can Google for a pic. I have pics of it installed, but all my pics are on my phone and this damned website/forum is terrible via mobile.

[JonB ~ PartsRack]

Some available at OEM parts source also

Very glad you found one.

[USAFPILOT]

Im gonna give that Napa part a try, if it’s no good I’ll pay for the OEM from you Jon. the place above doesnt actually have them. nobody updates their websites.

[RyanLS.GEN2]

We have them, i boxed 2 to ship after getting the emails, but both have since canceled to order else where.... usafpilot are you Rick?

[RyanLS.GEN2]

this is both parts for a gen1/one part for gen2 on my desk grommets.jpg

[JonB ~ PartsRack]

So we had three ready to ship, 3 inquiries, but NAPA gets the 3 sales!?

'Im gonna give that Napa part a try, if it’s no good I’ll pay for the OEM from you Jon.'



Viper Club Forum Sponsor loyalty is Soooo heartening. Thank You For Your Support.

Last month was a huge U Joint thread / analysis. In stock, 100% accurate advise here, But No sale here....... but saved $5 elsewhere?

Its time I retired........ Maybe a burn pile of OEM grommets for New Years?

[C5Longhorn]

I haven't bought and may still order along with a couple of 11 mm Torx bolts.

[JonB ~ PartsRack]

I certainly dont mind losing a $10, profitless sale. Its the principle.

[I just neeeded to whine before midnite.... added this episode to 2020 legacy.]

[Fatboy 18]

I certainly dont mind losing a $10, profitless sale. Its the principle.

[I just neeeded to whine before midnite.... added this episode to 2020 legacy.]

HAPPY NEW YEAR JonB

[dave6666]

I just neeeded to whine

You misspelled wine...

[Bill W]

I just ordered a tail light from Jon (somebody backed into my Viper...ugh!) because I knew I'd get the right part. I also got some good advice regarding insurance claims as a bonus. Thanks Jon.

[USAFPILOT]

I get what you’re saying, but 10.00 for the part, and shipping compared to 4.00 at NAPA Down the street is a no brainer this time. I’ve bought quite a bit from you, including two sets of tires, and will continue. Get over the ujoint saga. I’m still looking for font and rear sway bar end links, if you happen to scrounge some up.

[dave6666]

I knew I'd get the right part.

Have any of the Viper vendors ever sent you an incorrect part? I'm being serious. I've dealt with every one of them over the decades and never had a feeling of being unsure that way. Many other aspects to a parts transaction of course.