WTB Gen 1 stanchion cover for driver door

[Speedemon138]

Someone broke mine at some point and superglued it back together. Well the piece flew off while driving and I noticed the superglue residue on the inside. I’ll take anything that’s not broken. Someone else posted first regarding these so message them first and I’ll take his and recondition them or something. I just don’t want to hijack his post

[prodiver]

Try here. https://www.donscharfautomotive.com/...VIPER/7W/2010/

[GA-Viper]

My passenger side inner stanchion cover has a crack at one of the screw holes. Being somewhat anal I wanted to replace it. To my surprise I found a supplier on ebay.(x2 builders) who appeared to be re producing them from the original Mopar molds. As the picture on the listing clearly shows the Mopar logo. It is very pricy a $200 but I was willing to buy it if it was like quality to OEM. Today I received it. The quality of this piece is terrible. There are dimples and blisters all over it. And someone even sanded some of the bad defects around a couple of screw holes. They must have got in to trouble with Mopar as they have now sanded off the logo. I cannot speak to the fitment but have my doubts. If it was $40-50 I still would not use it on my car. Now I get to pay the return shipping.

If anyone knows of a viper parts company that may still have NOS please let me know.

Thanks.

[Szeszko02GTSGA]

So GA-Viper were you hiding join the viper club of Georgia..

GEN 2 Stanchions
The Stanchions haven't been available for sometime, several years ago I found the passenger side at Palmer $400. John Temple of Temple Performance has been working on manufacturing them for couple years. Hardest part is finding someone to build the molds, John has a manufacture in place and hoping to see the results later this year. I have an order in for the pair to put away as spares. Cost currently is $450/pair