Results 1 to 11 of 11

Hybrid View

  1. #1

    Car starts has no throttle

    Hey having a small issue, car was running fine. Then randomly stalled at a light, started rite back up fine, kept driving next light stalled again. Did this a couple times when I was on my way home, took it back out a couple hrs later it didn’t stall at all, went to move it Into the garage about an hr later and there was no throttle, car starts fine, idles fine, but nothing when you hit the gas, it’s an 08 with 9000km’s

  2. #2
    Enthusiast
    Join Date
    Oct 2013
    Location
    Nashvizzle TN
    Posts
    895
    How old is battery, any CEL?

  3. #3
    Quote Originally Posted by uvbnbit View Post
    How old is battery, any CEL?
    Battery is new, this happened a couple days after swapping out the old one, had no cel, but we scanned it a couple times and found a couple codes p1628, p2104, p2166, p2167, these didn’t come up all at once

  4. #4
    Enthusiast
    Join Date
    Oct 2013
    Location
    South of London, Surrey
    Posts
    7,577
    Is the throttle cable connected?

  5. #5
    Enthusiast
    Join Date
    Oct 2013
    Location
    The Western Reserve
    Posts
    2,556
    Quote Originally Posted by Fatboy 18 View Post
    Is the throttle cable connected?
    No throttle cable as it's an '08.

    - - - Updated - - -

    Quote Originally Posted by Mpacino View Post
    Hey having a small issue, car was running fine. Then randomly stalled at a light, started rite back up fine, kept driving next light stalled again. Did this a couple times when I was on my way home, took it back out a couple hrs later it didn’t stall at all, went to move it Into the garage about an hr later and there was no throttle, car starts fine, idles fine, but nothing when you hit the gas, it’s an 08 with 9000km’s
    Throttle position sensor maybe?

  6. #6
    Enthusiast
    Join Date
    Oct 2013
    Location
    South of London, Surrey
    Posts
    7,577
    Quote Originally Posted by 01sapphirebob View Post
    No throttle cable as it's an '08.

    - - - Updated - - -



    Throttle position sensor maybe?
    Goes to show what I know about Later Gen Vipers .......Sorry

  7. #7
    Enthusiast
    Join Date
    Oct 2013
    Location
    Dayton, OH
    Posts
    4,803
    Quote Originally Posted by Fatboy 18 View Post
    Goes to show what I know about Later Gen Vipers .......Sorry
    It was a good thought, and points to one of the downsides to owning one of the later gens - when something like this goes wrong, you can't just pop the hood and look for something simple like a cable popping off. There's something to be said for keeping things simple, especially when you literally can't drive the car if something like this happens.

  8. #8
    Enthusiast
    Join Date
    Jan 2018
    Location
    AZ, CA, VA
    Posts
    351
    Quote Originally Posted by 01sapphirebob View Post
    No throttle cable as it's an '08.

    - - - Updated - - -



    Throttle position sensor maybe?
    Wouldn't have the problem with an 06

  9. #9
    Enthusiast
    Join Date
    Oct 2013
    Location
    Dayton, OH
    Posts
    4,803
    If you are pressing the gas pedal and the engine isn't responding, it has somehow lost the throttle body calibration. I don't know how that could have happened, but I also don't know the full details of your vehicle.

    The only reason I mention this is because it has happened to me, but I was the cause. During the process of testing the HPTuners throttle relearn function, I ended up doing it incorrectly, and the result was exactly what you are describing - press the gas, and nothing happened. Engine idled just fine, everything else completely normal. I ended up doing the throttle relearn again, and that took care of it.

    You might try disconnecting the battery for ~10 minutes, and then give it another whirl. If it is still doing the same thing, you'll probably have to find someone that has the correct tools to do the throttle relearn procedure.

  10. #10
    Quote Originally Posted by Steve M View Post
    If you are pressing the gas pedal and the engine isn't responding, it has somehow lost the throttle body calibration. I don't know how that could have happened, but I also don't know the full details of your vehicle.

    The only reason I mention this is because it has happened to me, but I was the cause. During the process of testing the HPTuners throttle relearn function, I ended up doing it incorrectly, and the result was exactly what you are describing - press the gas, and nothing happened. Engine idled just fine, everything else completely normal. I ended up doing the throttle relearn again, and that took care of it.

    You might try disconnecting the battery for ~10 minutes, and then give it another whirl. If it is still doing the same thing, you'll probably have to find someone that has the correct tools to do the throttle relearn procedure.
    I tried disconnecting the battery but same thing, It’s gonna most likely need a relearn

    - - - Updated - - -

    Quote Originally Posted by Steve-Indy View Post
    He will contact "Garron" in Toronto...suspect/hope a wiTECH will do the relearn trick.
    That’s my plan

  11. #11
    Enthusiast
    Join Date
    Oct 2013
    Posts
    3,749
    He will contact "Garron" in Toronto...suspect/hope a wiTECH will do the relearn trick.


 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •