BC Coilovers Part Number

[outnumbered]

Is there a different part number for TA versions? On their website, it only shows one style, but I don't want to assume anything.

[VRYALT3R3D]

Why did you want BC coilovers? They don't exactly have the best reputation and are lower end Chinese coilovers.

[outnumbered]

I thought that many were using them with success. I'll bite, what are the other options. However, that doesn't answer my question.

[Arizona Vipers]

I thought that many were using them with success. I'll bite, what are the other options. However, that doesn't answer my question.

Are you going to track the car at all? I've had great success with MCS- http://motioncontrolsuspension.com/
They are very responsive and helpful as well. Great prices.

[outnumbered]

No, the car will likely not be tracked.

[Arizona Vipers]

No, the car will likely not be tracked.

The lowering caps work well by the way. Not sure what you are trying to do.

[outnumbered]

Thanks. I already have the lowering caps. I was looking at options of being able to go lower.

[LATAMUD]

Thanks. I already have the lowering caps. I was looking at options of being able to go lower.

They are fine for what you want to do. I track a 2008 with the BCs, and I street drive a 2004 with MCS shocks, either way is better than stock.

[outnumbered]

They are fine for what you want to do. I track a 2008 with the BCs, and I street drive a 2004 with MCS shocks, either way is better than stock.

Good info. Thanks.

[GM_500]

I just received my BC Coilovers on Saturday... will be installing this week.
From my research their set up works across all SRT models.
Model Number: Z-09-BR
I went with the upgraded swift springs. Everyone I asked about them had nothing but great things to say.

'Nero' on here just posted his '15 TA 1.0 with BC coilovers and swifts and it looks $$$.
'98intrigue' also has a nice DIY post on his install, as well as his thoughts on the coilovers. Hes had them on a few of his vipers.

[outnumbered]

I just received my BC Coilovers on Saturday... will be installing this week.
From my research their set up works across all SRT models.
Model Number: Z-09-BR
I went with the upgraded swift springs. Everyone I asked about them had nothing but great things to say.

'Nero' on here just posted his '15 TA 1.0 with BC coilovers and swifts and it looks $$$.
'98intrigue' also has a nice DIY post on his install, as well as his thoughts on the coilovers. Hes had them on a few of his vipers.

"Works across all SRT models"....that's what I needed. Thanks!

[98intrigue]

All the shock mounts are the same across the Gen V model lineup. When ordering the BC coilovers, you can specify your own spring rates if you'd like. As a note, you will lose the "bi-mode" shock functionality and your car will default to "Race" on the dash. I've put about 15k miles on 2 different sets of BCs I've had between my Anodized Carbon and 2 Stryker Green cars.

[outnumbered]

Thanks Ryan. I will be reviewing your install thread.

[Bryan Savage]

These look cooler.

https://tkomotorsports.com/product/5...ystem-a-r-h-c/