Parts for your viper Need want wish

[TKO MOTORSPORTS TEAM]

Image-40.jpg

Have you ever
looked for a specific part for you viper and just cant find it or no one makes it? What was the part or parts?

[ViperGeorge]

Body panels are getting hard to find. Side sills for example. Good selection of tires would be nice.

[StrokerAce]

I like both the 6 and 2 vent hoods but wish they made a 2 vent with deeper, wider, longer vents with a slightly more pronounced center hump. My car also has carbon fiber air vents behind the doors and if they could be more pronounced I think it would look good.

[ViperGeorge]

Carbon fiber hood vents (not the big ones over the tires) that are more than just a ring. They should be removable like the OEM ones. Carbon Fiber should match the OEM pieces. Also a carbon fiber grille.

[inquirer86]

- Front lip both carbon fiber/composite (want to paint color match)
- Rear trunk lip/spoiler in composite (want to paint color match)
- Tires..

[SLP]

Targa Top...like prefix used to offer. There's a good amount of interest in this among gen V owners.

Targa Top seals and latch kit. I'll cut/paint the roof myself.

Door cards.

[sadil]

Fiberglass, Carbon body panels so we can keep the OEM stuff off the car. Doesn’t need to be overly expensive but I don’t want to think about my 5k aluminum rocket panel while I’m driving on the track. That and a fiberglass hood would be on my wish list. Track guys need cheaper consumables in case of damage

[USAFPILOT]

A version of that hood that will work on the stock body, and more tires in the correct size. I like your adjustable suspension, but have it interface with the race/street buttons on our dash. If it did that I would buy it. It would be nice to raise my car to clearance my driveway curb and then lower it to street or track height on the fly with the factory buttons.

[jimuaya]

Hey TKO Motor Sports Team,

I like your front bumper with the fog lights and was wondering if it would fit my 2016 Viper? If you could, please contact me at 423-774-8045.

Thanks,

John Muaya

[eseery]

- Front lip both carbon fiber/composite (want to paint color match)
- Rear trunk lip/spoiler in composite (want to paint color match)
- Tires..

I echo this!

[SilveRT8]

A wide body version for the rear fenders, with deep dish wheels and a 6 vent hood with deeper pockets and higher center bulge.

[stradman]

Adjustable anti roll bars, race steering wheel less bulky, telescopic steering column, smaller lighter race brake Calipers suited for steel brakes, and if someone could figure out how to detach the Performance Pages from Uconnect so that they are always available irrespective of Uconnect, at a touch of a button!!

[Scott_in_fl]

- 5 lug conversion hubs so that we can fit any wheel we want

- GT3R-look wide body panels that can bolt right up to OEM mounting points.

[Mbccenter]

Going to 2nd the targa… Also the car in you pic that I can afford

[Bill Pemberton]

Oh, Scott, I do think the body panels for a wide body may already be in their inventory. Pretty sure Dave will respond , but it is so cool we have folks still working had to help Viper owners out with future ideas!

[ViperNC]

I second the carbon fiber grill. Also a carbon rear diffuser from a reputable source would be great.... Agency Power has these, but they are too difficult to work with as I recently learned.

[ViperGeorge]

How about an airbox that is fully insulated (maybe double wall with internal insulation) and which is a direct replacement for the OEM one? I know we have the DSE shield but I still insulate my airbox with the silver stuff. Looks like crap. The IAT sensors should also have some kind of insulation around them to prevent heat soak.

[MoHaWk2003]

3rd request for Targa. If I can’t convert the Viper, will have to get wife a 911 Targa 4 GTS...

[TKO MOTORSPORTS TEAM]

Hey TKO Motor Sports Team,

I like your front bumper with the fog lights and was wondering if it would fit my 2016 Viper? If you could, please contact me at 423-774-8045.

Thanks,

John Muaya

Hello John The front bumper and lights is all part of a GT3R body. Our GT3R body is not a a standard bolt on body kit: It requires extensive fabrication. We are building tow vipers right now with our GT3R body If you would like more info and pics John you can email direct martin@tkomotorsports.com

[sharmut]

I would love to have a console containing 12v switches that replace the grab handle.

Clean up the mess below.
IMG_7393 2.jpg

[sharmut]

The front right fender liner, ie splash-shield 68139708AH.
68139708AH.png

[TKO MOTORSPORTS TEAM]

Would love to have a console containing switches that replaces the grab handle.

IMG_7393 2.jpg

Hello Sharmut We already have grab handle add on that mounts racing radio or motorola you could also mount a switch panel if you needed to. We normally mount all our switches in the center console so a driver can reach them while strapped in. We also have aim solo dash mnt for data and video; and we have a fire bottle pull that mounts in your cigarette lighter. All are in house race part we dont list in our catalog but they are available.

[sharmut]

Hello Sharmut We already have grab handle add on that mounts racing radio or motorola you could also mount a switch panel if you needed to. We normally mount all our switches in the center console so a driver can reach them while strapped in. We also have aim solo dash mnt for data and video; and we have a fire bottle pull that mounts in your cigarette lighter. All are in house race part we dont list in our catalog but they are available.

I'd rather avoid the add-on option. My current setup works, as I can reach everything while strapped in, but wouldn't mind looking at your solution.

[BSLSK]

I should have bought that 9L targa from Prefix when I had the chance. x50 or whatever number we're at for that.

[Scott_in_fl]

Oh, Scott, I do think the body panels for a wide body may already be in their inventory. Pretty sure Dave will respond , but it is so cool we have folks still working had to help Viper owners out with future ideas!

Hello John The front bumper and lights is all part of a GT3R body. Our GT3R body is not a a standard bolt on body kit: It requires extensive fabrication. We are building tow vipers right now with our GT3R body If you would like more info and pics John you can email direct martin@tkomotorsports.com

But a killer kit would be a standard bolt on set of panels. Gemballa made a name on this type of mod, as has Vorsteiner and others for other makes. Why not just graft some Styrofoam onto a wrecker and mold it into something that you can cast a mold from? The only real issue seems to be the doors, but only with respect to how the rear of the doors would flare into a wider rear fender. But, if we're only adding say 2" per side, you might be to get away with using the standard door and just coming up with a tasteful, but quick, transition around the rear wheel. Other than that, it is a hood, front bumper, sills, rear fenders and rear bumper. Admittedly no small undertaking, but definitely workable. And the effect if done well would be simply awesome. Here are some ideas from IG (yes, I realize some are Gen III/IV), but I think it could be done much better with the Gen V if something closer to a GT3R look was the goal. Again, not the full dimensions of a GT3R, more a GT3R-lite.

WidebodyViper2.jpg
WidebodyViper1.jpg
WidebodyViper3.png
WidebodyViper5.png