Coolant part number and how much to use

[01sapphirebob]

Does anyone know the part number for the five year coolant that the GEN IV's use? Also, how much should I purchase? Thanks for any and all help.

[Steve-Indy]

68048953AB

Buy 2 gallons of the undiluted type...then mix with 2 gallons of distilled water...and, yes...you will have some left over.

They also sell Mopar coolant that is already a 50/50 mix...but, I do not know that part number.

Be SURE not to confuse the two !!

I looked for EXACT total volume on the 2009 Service Manual CD...none stated...but, as I recall it is about 3.5-4 gallons...though you may have a little left over as system will retain some coolant...especially if you have not drained block plugs

[01sapphirebob]

68048953AB

Buy 2 gallons of the undiluted type...then mix with 2 gallons of distilled water...and, yes...you will have some left over.

They also sell Mopar coolant that is already a 50/50 mix...but, I do not know that part number.

Be SURE not to confuse the two !!

The necessary volume of the coolant depends on the Generation...and, can be found in your manual.

The with the answer as always. Thanks Steve!!!

[Steve M]

Read this through as well (scroll down most of the way in this particular post):

https://driveviper.com/forums/thread...l=1#post369117

[brickauto]

Alternative to Mopar Coolant is Zerex G05 (I'm running this in my Gen IV).
https://www.valvoline.com/our-produc...freeze-coolant

[Back In Black]

Alternative to Mopar Coolant is Zerex G05 (I'm running this in my Gen IV).
https://www.valvoline.com/our-produc...freeze-coolant

Ditto on the Zerex G-05.

Specified coolant for Gen4 is HOAT (hybrid organic acid technology).

15 liter capacity.

Hoat 1.JPG