Results 1 to 6 of 6
  1. #1
    Enthusiast
    Join Date
    Oct 2016
    Location
    Trois-Rivieres (QC)
    Posts
    229

    1994 Power Steering tank leak

    EDIT: Power Steering pressure hose is leaking, not the tank. At first I thought tank was leaking. Sorry about that.

    $6.33 on RockAuto (Edelmann) looks like a good deal!

    91649185_10163615254525221_8670442074631307264_o.jpg
    Last edited by MuRCieLaGo; 04-04-2020 at 02:57 AM.

  2. #2
    Enthusiast
    Join Date
    Oct 2014
    Location
    Driving around with contaminated fluids braking at 95% while squirting WD40 in people's locks
    Posts
    3,036
    By the way the power steering reservoir for the Gen 2 is available separately. Not sure if it also fits the Gen 1 pump tho. They are about $40. The Wrangler pump for a Gen 2 is about $50. So you can do the whole thing for about $100 w/o bracket and pulley.

  3. #3
    Enthusiast
    Join Date
    Oct 2016
    Location
    Trois-Rivieres (QC)
    Posts
    229
    Quote Originally Posted by dave6666 View Post
    By the way the power steering reservoir for the Gen 2 is available separately. Not sure if it also fits the Gen 1 pump tho. They are about $40. The Wrangler pump for a Gen 2 is about $50. So you can do the whole thing for about $100 w/o bracket and pulley.
    But I haven't seen any thread of anybody having problems with the tank, I'm assuming mine is still good for a while!

    Thanks!

  4. #4
    Enthusiast
    Join Date
    Oct 2016
    Location
    Trois-Rivieres (QC)
    Posts
    229
    Why did I receive 2 o-rings with the line, and a plastic cap (I'm assuming the cap is for the old line)?

    92363398_10163643060000221_7718908996668620800_o.jpg

  5. #5
    Enthusiast
    Join Date
    Oct 2013
    Location
    New Braunfels, TX
    Posts
    1,836
    The O-rings go on each end of the hard line. They are called o-ring bump tube seals. Be sure to dig out the old, hard ones first and put a light coating of oil on the new ones.

  6. #6
    Enthusiast
    Join Date
    Oct 2016
    Location
    Trois-Rivieres (QC)
    Posts
    229
    Alright thanks! The job took about 7 minutes total! There's so much room!

    Old o-rings were melted on the line.


 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •