Stripe Measurements Needed

[drewsss]

Hi everyone,

Would like to add some stripes to my 2004 vert, just like the ones shown below.

Does anyone have measurements for these stripes, for both the hood (i.e., all the way from windshield edge to front bumper) and also rear deck?

Thanks, Drew

Stripes.png

[Steve M]

I searched for a while, but only came up with the Gen 3 stripe dimensions. 2008-2009 cars used narrow stripes, but the picture you show appears to be a 2010 which went with highly tapered, but much wider stripes.

If you can find someone with a striped 2010, see if they'd be willing to take the measurements you need. I can measure my '08 stripes, and the Gen 3 dimensions are in another thread somewhere. It'd be nice to have that info all in one thread, maybe with some pictures so people can have it as a future reference.

[drewsss]

Thanks Steve... much appreciated. I personally like the thicker stripes versus thin. I could probably come close based upon the pic above, but would rather have exact measurements. Really appreciate your help.

[Viper vince]

Hi everyone,

Would like to add some stripes to my 2004 vert, just like the ones shown below.

Does anyone have measurements for these stripes, for both the hood (i.e., all the way from windshield edge to front bumper) and also rear deck?

Thanks, Drew

Stripes.png

Try calling Prefix maybe the might be able to help.

[drewsss]

Thanks Vince - great idea.

[Bill Pemberton]

Looks like the wider , tapered stripes from 2010, so hopefully someone with a 10 Vert can drop you a note?

[TheMadMachinist]

These measurements are off my 2010 Coupe.

......Location........................Center...... ..Stripe
Front start of stripe...............1.050".........5.000"
Front edge of hood................1.750".........5.400"
Back of the hood..................2.200"........12.750"
Front of roof........................3.425"........14.050"
Back of roof........................3.975".........14.050"
Rear deck lid.......................4.275".........13.900" This was taken 5.500" from the rear tip of the deck lid forward. I added a pic so you could see how the radius of the rear window was the reason for the 5.500"
Rear tip of rear deck lid.........4.300".......13.900"
Bottom of the rear of the car..4.500".......13.450" I never knew until now that the stripes taped down smaller a little on the back of the car.
I hope this helps




DSCN0690.jpg

[drewsss]

Perfect! Thanks!