Page 1 of 2 12 LastLast
Results 1 to 25 of 37
  1. #1

    Opinion Which stripes do you like better

    I switched out the SRT Stripes for the GTS stripes? which do you think looks better?
    Attached Images Attached Images
    Last edited by V10 Snake; 03-01-2020 at 08:41 PM.

  2. #2
    IMO, 2nd one looks better, but the sticker badge is too big. I'd get a sticker badge that is OEM size like the ones on the TA and ACR.

  3. #3
    Quote Originally Posted by serpent View Post
    IMO, 2nd one looks better, but the sticker badge is too big. I'd get a sticker badge that is OEM size like the ones on the TA and ACR.
    Good eye!! Idid just that. Stryker logo is normal size with the double GTS stripes

  4. #4
    GTS stripes but the red on the side needs to go. Silver on white looks great

  5. #5
    One big reason i changed is that i like when the stripes go down the rear deck lid and rear bumper on the Gen V (3rd pic). Looks wicked and aggressive when driving from behind. Didnt like how the SRT stripes ended on the top of the trunk

  6. #6
    I watched the install and after the silver stripes were finished it looked like something was missing. Thats when the red was added.

  7. #7
    Enthusiast
    Join Date
    Oct 2013
    Location
    Greenwood Village, CO
    Posts
    3,797
    Either looks good. I always like a Viper with stripes but the red does not look good. Sorry.

  8. #8
    I prefer full GTS stripes over SRT ones. Since you have the Red Interior. GTS stripes look good without the red, but maybe a thin red line (like on the SRT stripes) might look better than the thick one and still tie in the Red interior.

  9. #9
    Enthusiast
    Join Date
    Nov 2013
    Location
    Rochester Hills, MI & Orlando, FL
    Posts
    1,376
    Yep, like the GTS stripes better and with the pinstriping like shown on the SRT striping. Guess I didn't know the SRT stripes ended on the deck lid.

  10. #10
    Quote Originally Posted by V10 Snake View Post
    Good eye!! Idid just that. Stryker logo is normal size with the double GTS stripes
    I see. the regular stripe had the normal size sticker.

  11. #11
    Enthusiast
    Join Date
    Aug 2018
    Location
    New Hampshire
    Posts
    46
    GTS stripes wins for me. I actually took few glances before I decided

  12. #12
    Enthusiast
    Join Date
    Jan 2015
    Location
    Virginia Beach
    Posts
    127
    Get rid of the red pinstripes. Yikes.

  13. #13
    Enthusiast
    Join Date
    Jan 2015
    Location
    North VA
    Posts
    281
    In the bottom right pic, I like the red pinstriping if it had the red viper badge from the first pic. The badge is way too big. The pinstriping looks good thin like that. In the other pics, it looks way too thick, plus the GTS silver stripes would be better off without it.

  14. #14
    Enthusiast
    Join Date
    Oct 2013
    Location
    Phoenix
    Posts
    651
    GTS stripes. I'd lose the red.

  15. #15
    GTS stripes. Replace red with black if you must have pin stripes.

  16. #16
    Bruce H.
    Guest
    When looking at the pics for the first time I immediately preferred the SRT stripe as it didn't seem so dominant and pronounced. After reading other's comments I think it was probably also the narrower red stripe that I preferred, and the standard size decal would finish it off nicely for me. Is there no way to continue the SRT stripe down the rear?

    But if the GTS stripe is your final preference then maybe the narrower red stripe, or red stripe delete could be the ultimate crowd pleaser! I also think the narrow stripe in black would be a good choice.

    Good luck!

  17. #17
    Enthusiast
    Join Date
    Nov 2013
    Location
    Blair, Nebraska
    Posts
    3,804
    Agree with the comments that state the red striping would tie in with the interior , and it is simply that the use of a more subtle, thin red pin striping pulls that together. We did a car similar to that years back and " thin is in!!"

  18. #18
    I actually like the GTS stripe with the red pinstriping
    Last edited by Ghost410; 03-02-2020 at 11:11 AM.

  19. #19
    My opinion you want the red pin stripes, then make them much thinner and put on on the both sides of the stripes. There is an owner on here who did that with a white car, blue rally stripes, red pin stripes. Looked really nice. I think it was IHOP. can't recall....

    Photo of the car on the track appears on the main page banner occasionally...

  20. #20
    for some reason (maybe the gray?) the stripes your currently have don't look right to me...BUT my opinion changed with this car. This might be the car I was describing above... maybe the stripes were only on the outside.

    2014-05-02_00001.jpg

  21. #21
    GTS stripes all day, thin red pinstripe should be great.

    But, I hate the fang stripes or whatever, I mean I hate them, they look silly on anything I’ve seen them on IMHO.

  22. #22
    Enthusiast
    Join Date
    Jun 2019
    Location
    Central Florida
    Posts
    1,042
    GTS stripes.

  23. #23
    Enthusiast
    Join Date
    Jan 2020
    Location
    Upstate NY
    Posts
    50
    Having a GTS, I prefer the GTS strips and I agree that the sliver alone needs a little more to make it pop.

  24. #24
    Enthusiast
    Join Date
    Jul 2018
    Location
    Spring TX
    Posts
    714
    red stripes are to fat

  25. #25
    Enthusiast
    Join Date
    Apr 2019
    Location
    Northern CA
    Posts
    727
    I like the last pic but i guess I'm biased... however, speaks to others' point about losing the pin stripes!

    IMG_0162.jpg

    IMG_0163.jpg

    IMG_0175.jpg


 
Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •