Smoke on Decel Too much Oil

[Shiner]

https://youtu.be/7JiPUqIoe4U

This is a 97 Heads and Cam Car. Any idea about the white smoke at the end? We did about 15-16 dyno runs. The white smoke was worst the first couple of runs. I’m thinking it’s just unburnt fuel as it’s falling to the ground. I run a Vent to Atmosphere -12 AN dual catch can. Pulled plugs 1 and 3 and they look good.

Any ideas? Greg Good did these heads less than 10 months/ 1000 miles so I’m doubting issues with them. The car itself has 22k miles.

Also car made 567 on dynojet224 and 586 on Mainline. Thought that was strange as jets normally read highest. Car runs really good, was tuned by Torrie. I haven’t done a leak down or or compression test as the car makes good power and have not suspected issues.

The oil looks too be 1-2qts over the MAX mark, 1/2” over or so. Could that be causing the smoke? I did see it driving today that it would smoke on decel from a High RPM stint. I’m using 15-50 Driven XP6 oil. A Shop did the oil change.