I wish I could find a GT front bumper

[Trick]

a GT2 (GTSR) would be a dream for me, love the canards and love how clean the spliter was

[dave6666]

Um. Those parts are available from Autoform. They fit the factory nose.

BTW a GT2 is not a GTSR. The GT2 is the limited release street legal version of the GTSR. If you want the GTSR nose they make that one too. It is a complete front replacement piece that includes the splitter and has other complications incorporating itself on to the Gen 2 GTS core support.

[Trick]

0SQ381W1AA

I Don't want the extra fog lights...

[Fatboy 18]

0SQ381W1AA

I Don't want the extra fog lights...

So is this what you are looking for? Autoform Race Fascia without light holes, Slots for front Brake ducting then add the front spoiler?



If so, I want to throw something out there to make people aware of Exactly of what they are buying!

Steves race fascia is his own design, it may look similar to a gen 2 OEM Front fascia, but the top curve above the open grille is NOT the same profile as a stock GEN 2 Viper. The profile is flatter than the pointed shark nose of a stock Gen 2 (which means if you look down on it vertically, the lower curve profile sticks out more than the top curve by at least an 1 inch 1/2.

Note, this is not a rant over Steve's product, but it is something to be aware of as its cost me a lot of money buying something that I can't work with for what I had planned to do.

[Trick]

So is this what you are looking for? Autoform Race Fascia without light holes, Slots for front Brake ducting then add the front spoiler?



If so, I want to throw something out there to make people aware of Exactly of what they are buying!

Steves race fascia is his own design, it may look similar to a gen 2 OEM Front fascia, but the top curve above the open grille is NOT the same profile as a stock GEN 2 Viper. The profile is flatter than the pointed shark nose of a stock Gen 2 (which means if you look down on it vertically, the lower curve profile sticks out more than the top curve by at least an 1 inch 1/2.

Note, this is not a rant over Steve's product, but it is something to be aware of as its cost me a lot of money buying something that I can't work with for what I had planned to do.

No, I want the canards built in like the gt2.. and I dont really want the support rods look.. makes me it look kinda cheap and aged but that's just what I think

[dave6666]

Oh. You want to go OEM. One of those types lol.

[SilverACR]

The fog lights make the look though...

[Trick]

gt2.jpgyuck.jpg

yea.... I want the factory one, Im not into the autoform one... Not that Steve doesn't do great work.

[99RT10]

I have a NEW factory GTS-R bumper. But really, all you need to do is drill two holes in the factory facia to fit it.

[Trick]

Send me some pics on the facebook.

[Trick]

I have a NEW factory GTS-R bumper. But really, all you need to do is drill two holes in the factory facia to fit it.

Send me some pics

[99RT10]

Send me some pics

I'll get banned, but there is always VA where free thought and expression is still alive.

[MH60M]

I'll get banned, but there is always VA where free thought and expression is still alive.

^^^This! And......if you get the Tapatalk App you can access VA and pics are super easy to upload from mobile devices.

[dave6666]

Motion to ban everyone?

[Fatboy 18]

The canards on the GT2 cars are not part of the molded front fascia they are screwed on

Autoform makes canards, they are held on with double sided trim auto tape and two small screws on the underside.