GEN 3 Gen 4 Upper Door Inside Trim reproduction

[J TNT]

I have replicated the Upper Door Inside Trim, and made from the same material as factory . These pieces are known to crack and haven't been available for the last 7-10 years, unless you find a used complete door card at a much Higher cost . I'll be bringing 4 Trim pieces with me to the Woodward Dream Cruise on August 17th to gauge interest and look at possibly making 6-8 more .

The cost of the ones I have will be $260 U.S. and if they sell on August 17th , then I'll look at moving forward with more ...

If you are interested call me at 416 930 40, four ,nine

. Pics below showing the Trim

[V10Sidepipes]

Possibly a stupid question, but why go to the trouble to repro them and make them in the exact same material / configuration that will just crack again when looked at funny?

[EZ 2B Green]

Looks great! Nicely done.

[J TNT]

Possibly a stupid question, but why go to the trouble to repro them and make them in the exact same material / configuration that will just crack again when looked at funny?

These are slightly thicker on the top side were they crack . And are New material . If I went with Aluminum it would drive the cost up to over $700 per unit, and most wouldn't pay that........
It also maintains the factory look . Feel free to swing by on August 17th and have a look .

- - - Updated - - -

[J TNT]

Looks great! Nicely done.

Thanks Mike !

[V10Sidepipes]

These are slightly thicker on the top side were they crack . And are New material . If I went with Aluminum it would drive the cost up to over $700 per unit, and most wouldn't pay that........
It also maintains the factory look . Feel free to swing by on August 17th and have a look .

- - - Updated - - -

I’m in for a set if/when you start shipping.

[Rialb]

I have replicated the Upper Door Inside Trim, and made from the same material as factory . These pieces are known to crack and haven't been available for the last 7-10 years, unless you find a used complete door card at a much Higher cost . I'll be bringing 4 Trim pieces with me to the Woodward Dream Cruise on August 17th to gauge interest and look at possibly making 6-8 more . The cost of the ones I have will be $180 U.S. and if they sell on August 17th , then I'll look at moving forward with more ...
If you are interested call me at 416 576 0845 before August 12th . Pics below showing the Trim

Im in for a pair, I was just looking at buying a door card to get these pieces.
I will text you tomorrow.

Thanks

[J TNT]

Im in for a pair, I was just looking at buying a door card to get these pieces.
I will text you tomorrow.

Thanks

Sounds good ! Or call after 6:00 pm

[Zubik]

I'm down. Where do I send my money ��

[sambo32]

Interested

[J TNT]

Interested

Give me a call at 416 930 40 four,nine after 9:00 am tomorrow !
Thanks

[J TNT]

I'm down to my last 5 sets of trim pieces , if anyone needs them let me know . This will be my last production run for this year.......

[nautoncall]

I am

[J TNT]

I am

You have a pm .

[Jmerk1031]

Got mine installed and they look great! Love them Jay, great work. Most impressive part! No more rattle!!!!

[Zubik]

Sadly I have mine sitting in the shipping tube for months... any tips on the install? What/how did you attach the new trim to the door card?

[J TNT]

Got mine installed and they look great! Love them Jay, great work. Most impressive part! No more rattle!!!!

Thanks Jmerk glad to hear you are Happy with them !

Sadly I have mine sitting in the shipping tube for months... any tips on the install? What/how did you attach the new trim to the door card?

Zubik send me a pm with your cell number and I'll reach out to you on Sunday .
Thanks

[Zubik]

I've been a bit busy and keep forgetting to call. I'll give you a ring.

[J TNT]

I'm looking at doing one last run of door trim pieces for 2020 . These haven't been available from FCA for the last 10 years . And are notorious for breaking ...
Let me know if you're interested ..........

Jay

[Bluecoupe]

I am interested in a set for my gen 3 coupe

[J TNT]

I am interested in a set for my gen 3 coupe

PM Me your cell number .
Thanks
Jay

[03SRT757]

Good day, possibly interested in a set!

[J TNT]

Anyone serious about Door Trim , send me a pm with your cell # , by January 28th, 2020 . That is when the order goes through .
This will be one run and done for 2020 .

Thanks
Jay

[J TNT]

Thanks to all who placed an order. If anyone else is interested, send me a pm with your cell number.
Jay.

[Fatman2006]

Got mine installed, looks great and the new pieces are much thicker and solid compared to the stock ones. Thanks Jay.
20200318_153824.jpg
20200318_153749.jpg