Rub Strips on Carbon Fiber Corner Splitters

[Vpr898]

I was reading through the owner's manual and found reference on page 315 to so-called "Rub Strips" on the carbon fiber corner splitters, part of Mopar 82214238. The manual page implies that these rub strips can be replaced, and suggests that they be replaced when sufficiently worn. I believe I've correctly identified the rub strips, and have attached a couple pictures as reference, but I have yet to find any information on these besides that single owner's manual page.

Does anyone know if they are indeed individually replaceable? Has anyone replaced them or had them replaced? Does anyone know a part number? (the only number I know is for the ground effects kit in total, the number I included above). Any info would be appreciated.

Thanks!

Screen Shot 2019-07-15 at 1.26.55 PM.jpgLS_377862_3192074.jpg015f778912f373f90e538ae0ec12e7ca.JPG

[Special Ed]

Yes they are replaceable. There are two types, one for the TA and one for the TA2. The TA2 version extends forward slightly, acting as a splitter. They are interchangeable. JonB at PartsRack is probably a good source.

[Gen5snake]

Contact Wayne at Xtreme Supercars xtremesupercarsinc@gmail.com. He has replacement strips for both OEM or his aftermarket spliters. Can't beat his prices.

xtreme.JPG

[JonB ~ PartsRack]

Extreme (Or PartsRack) are both great places to save some $$ vs. OE CF parts......

[pony23]

I bought my TA 2 strips from ARD Motorsports.