Results 1 to 21 of 21
  1. #1

    Red face Took The TA Out For First Ride

    Well had the TA out Today, First Drive, Put 60 miles On Her, And This Snake Is Awesome!!!!!, Firm Ride for Sure ,which is what i was expecting From the TA, Switched it too Track Mode, and it Gets Really Tight , it's Race Car Ready,KooL *HIT, Wife Took Some Picks from the Side Of the Road.Check EM OUT !!!! The Throw On The Shift Could Be Shorter, Felt A Bit Long.There Will Be More........Updates !!! To Come



    Last edited by 1Koolasp 16ACR; 03-01-2014 at 05:06 PM.

  2. #2
    Enthusiast
    Join Date
    Oct 2013
    Location
    Mopar Garage
    Posts
    3,502
    car looks awesome, glad she got to stretch her legs.

    Bruce

  3. #3
    great pics... very nice

  4. #4
    Enthusiast
    Join Date
    Oct 2013
    Location
    The True North Strong and Free Ontario, Canada
    Posts
    1,635
    Something about the WHITE TA, that stands out even from the orange one. In my own opinion and taste, it would have been nice to offset all that white with maybe an orange carbon drivers side stripe or wheel trims. Just something. Although like I said,,,it is a stand out car and much to be appreciated.

    Nice ride !!

  5. #5
    sharmut
    Guest
    I still believe the white and black should have the SRT racing stripes. Black stripe on the white and white on the blacks.

  6. #6
    Enthusiast
    Join Date
    Oct 2013
    Location
    Tysons Corner, VA
    Posts
    4,676
    What are your initial thoughts?

    Thoughts compared to your previous Viper?

  7. #7
    Enthusiast
    Join Date
    Oct 2013
    Location
    Rockford
    Posts
    488
    White TA is totally awesome, that would be my pick too if I were in the market for new one. What do you think of ghostly off color white, blue or black stipes done with a faint touch in the snake skin pattern. Just a thought!!!

  8. #8
    Thought About A Stripe,It Would Be One BLK Stripe, Over The Driver's Side Just To Break Up The White, Like The ACR. Keeping It The Way The Factory Did It!!!!! For Now, Just Gonna Leave It Stock,Yeh Just Can't Compare It A Gen2, It's Night And Day !!! Need More Seat Time For Sure, So Far So Awesome !!!! Def Needs A Shorter Throw Shifter, Even Though The Shifter Is Mounted Right Too The Tranny , There Is No Linkage Sought Of, The Throw Is Longer ,Then My Gen2, But That Can Be Addressed In Time.
    Last edited by 1Koolasp 16ACR; 03-01-2014 at 11:12 PM.

  9. #9
    Enthusiast
    Join Date
    Dec 2013
    Location
    New Jersey
    Posts
    686
    Very nice. I'm dying to see and shoot a TA in person. Hopefully I'll see at least one in a months time, either at NYIAS or in Ohio.

    --RS

  10. #10
    Enthusiast
    Join Date
    Oct 2013
    Location
    Houston, TX
    Posts
    3,005
    The shifter itself is very good, much better than previous gens. It just needs a shorter handle. MGW makes them.

  11. #11
    Isn't the factory shifter a short throw one?

  12. #12
    Thats What I Thought, Ralph,On Some Interview Was Saying,That The Shifter Was Mounted Directly To The Tranny, Eliminating The Linkage, Will Contact MGW,And See What They Have To Offer To Make The Throw Shorter,NineBall Say's, Needs A Shorter Handle, Do They Make One For The Gen5?????? If So Which One Is It , I went To There Sight And Do Not See It For The Gen5

  13. #13
    Enthusiast
    Join Date
    Oct 2013
    Location
    Houston, TX
    Posts
    3,005
    You have to call them. Their site hasn't been updated in years. I ordered mine last week, should have it sometime this week.

  14. #14
    Enthusiast
    Join Date
    Dec 2013
    Location
    Long Island
    Posts
    89

    New TA

    Was that Ocean Parkway you were cruising down ? If so hope to see your TA soon !!

  15. #15
    Enthusiast
    Join Date
    Nov 2013
    Location
    WIsconsin
    Posts
    687
    You are so lucky to get yours out. We just got another 3 inches of snow last night

  16. #16
    Nice lookin TA you got there.

  17. #17
    That's a beautiful color! Congratulations!

  18. #18
    HEY RED, Yes I was On Ocean Parkway.!!! Thx Guy's!!!!!! I Will MGW Tomorrow ,Thx NineBall. You Got A Part # On That ??

  19. #19
    Liking the white more and more congrats!

  20. #20
    Quote Originally Posted by 1koolasp 14TA View Post
    Thats What I Thought, Ralph,On Some Interview Was Saying,That The Shifter Was Mounted Directly To The Tranny, Eliminating The Linkage, Will Contact MGW,And See What They Have To Offer To Make The Throw Shorter,NineBall Say's, Needs A Shorter Handle, Do They Make One For The Gen5?????? If So Which One Is It , I went To There Sight And Do Not See It For The Gen5
    The shifter in all new, has a billet base like the MGW and there is very little tunnel room for shift throw improvements to be had. I know George was working on a shifter, but the packaging of it was the difficult part. The shorter shifter knob they have will do that a small amount though.

    Stock GenV shifter
    100_4894.jpg

  21. #21
    Enthusiast
    Join Date
    Oct 2013
    Location
    N. Indiana
    Posts
    1,050
    The white is amazing! I bet you had the biggest smile on your face!


 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •