Gen 4/5 head

[Revolution]

There heads will be actually Gen 4/5 specific and will work on Gen 3 with a Gen 4 head swap. Right now I just want to get these heads and my headers and exhaust going then might take a look at Gen 1/2 if there is enough interest.

[noisy]

Any updates on the price and when it will be available?

[J TNT]

You have a pm .

[Revolution]

Any updates on the price and when it will be available?

Yes progress but there is going to be lots of time on the bench to get the heads where we want them then on my test car. I'm hoping late this spring time to have it fully tested!

[PaulP]

keep us posted we are watching this gen 4 conversion closley I'm 100% in on going this route!

[Revolution]

keep us posted we are watching this gen 4 conversion closley I'm 100% in on going this route!

For sure making some good progress and should have some valves in shortly to do some testing with!

[Revolution]

And to add to this thread

[Murpowa]

Bump for some more info. What ever happened with this progress? I would love to see what magic Hptuners could do on a viper with headwork.

[Revolution]

I was working on a plan but until I figure some more stuff out I'm waiting g to see which direction I'm going. I ran my car this weekend for the first time on HP and some else's tune and the car is down power. So far what I see with HP is a lot of tables to adjust that as soon as you do it puts the car in limp mode. Think now that I have more free time I will start looking and testing the HP tuners software out myself.

[Revolution]

Doing some more flow bench testing this next few weeks updates to come

[J TNT]

Any updates ?

[FrgMstr]

Updates?

[Revolution]

Really just holding to see if there is a chance to do a cam also cause we will then optimize the port work for the new cam. But my faith in doing it with hp is not high so looking at some other solutions for tuning as well.