At the end of the season, I noticed the right front speaker on the factory system in the RT was breaking up. The foam surrounding the speaker is disintegrating.

I got the speaker out and found a replaced 5.25" speaker from Alpine that will bolt in. However, the factory connector on the original sticker has 4 wires going to it....2 green and 2 blue. As I understand it...the blues and greens each are each a "pair".

I'm at a loss to understand the correct way to hook up the new speaker that only has two tabs.

I searched....but didn't find anything about the wiring. I'm thankful for any advice.

I will also add that I'm sure I pulled all the clips and fasteners, but the passenger side door panel seems to be still holding for some reason at the stanchion.