Building individual throttle bodies

[darkostoj]

Anybody know if there are any parts available for me to build individual throttle bodies for my Gen III V10 engine?

The engine is in my Rolls Royce race car and I'm planning on converting the coils to Coil on Plug, and thought I could probably do something fun with the intake as well.

Looking for anything really that can save me some fab time, mainly intake flanges.

I know buying any kind of complete setup will be super expensive, so I would prefer to just build something on my own.

Possibly put together a kit and be able to sell it.

Thanks!

[pokeyl]

Funny you should bring up coil on plug, I'm working on a plug and play kit right now.

[darkostoj]

Funny you should bring up coil on plug, I'm working on a plug and play kit right now.

Were you going to use the Gen V valve covers and coils?

I have an AEM that has the ability to run 10 smart coils. I was just going to wire them into the ECU.

[pokeyl]

Were you going to use the Gen V valve covers and coils?

I have an AEM that has the ability to run 10 smart coils. I was just going to wire them into the ECU.

Nope, stand by, early next year Jan-Feb I should have the photo-type on my car!

[Mamba003]

Dan Lesser did mine but don’t think he did any secondary production besides client cars who went with the gen3/4 build on a gen 3. He also did the gen4 10 coil conversion on my car. F5411C1F-6B6C-459E-BEA1-04DC6B1A4485.jpg

[S281e]

Where can I get an intake and valve covers like mamba003?

[LATAMUD]

Where can I get an intake and valve covers like mamba003?

That's Gen4 intake and valve covers off a 2008-2010 Viper. You will need the Gen4/5 heads to run these valve covers and intake.

[S281e]

I have a Gen 4.....is there somewhere I can have the intake and valve covers chromed?