Any Gen 3 car photos with Pirellis P Zero

[MuscleJunkie]

Can anyone with a Gen 3 or Gen 4 post up a couple photos running the regular Pirelli P-Zero tires in 355/30 19 and 285/35 18 sizes? Trying to get an idea how they look. Also, how do you like them (The non-viper spec ones since apparently they are no longer available)

Thanks

[redrichard]

Fronts are 295/30/18

[redrichard]

IMG_0535.jpgIMG_0705.jpg

Fronts are 295/30/18

Best when Hot !

[Stealth78]

I actually do have the 285/355 combination in the regular P-zeros (non Corsa). I will try to post some pics later. In my opinion the size difference was so minimal that it's not really noticeable. I do have to say I'm not much of a fan of them though. Not sure how much power you are making but for me with pretty much a full bolt-on, 3:55 geared GenIV they don't hook up very well.

[MuscleJunkie]

I actually do have the 285/355 combination in the regular P-zeros (non Corsa). I will try to post some pics later. In my opinion the size difference was so minimal that it's not really noticeable. I do have to say I'm not much of a fan of them though. Not sure how much power you are making but for me with pretty much a full bolt-on, 3:55 geared GenIV they don't hook up very well.

Thanks - my 2006 Copperhead is bone stock. It's really strange, I've heard so many different things about the tires. Purchased a set from JonB as he recommended them and says that he runs them on his car. $$$ was not a factor in my purchase and I selected the tire combo solely based off of his recommendation. Coming off a set of Viper Spec PS2s that I purchased from him back in 2010.

I've yet to install them.... Would love to see your photos.

[Stealth78]

Side Dyno.jpg

- - - Updated - - -

Front Dyno.jpg

[Stealth78]

Just to be clear the car is dropped about 3/4 of an inch on all four corners using spring caps.

[MuscleJunkie]

So should I expect my stock 06 to sit any different or have any visible difference to the look with these new tires?

[Whiskey]

For get those tires. Get a set of Nitto Invo. Best street tire for a viper ever.

Pouring rain. No fear. No bouncing in the lane. They even hook like a mother. They have done 9’s on TT Vipers.

[Stealth78]

So should I expect my stock 06 to sit any different or have any visible difference to the look with these new tires?

Trust me there will virtually be no difference.

[SilverACR]

1D542869-A0E4-4DD2-AB71-697D63334456.jpg
I like the PZeros... this picture was from rendezvous after I corded out my front R7s after 1 day of sessions. I actually posted by best time on day 3 with these. They come up to temp slower about 1 full lap and hold predicable for the rest of the session. They do slip around cold on the street and are terrible in autoX due to never getting warm.

Anyways my2 cents is they are a fine tire. Probably not the best, but great for the street and better than what you hear about on the track. These are 295F 355R

Rough track setting per ACR manual, so probably an inch lower than street.

[Creatre]

For get those tires. Get a set of Nitto Invo. Best street tire for a viper ever.

Pouring rain. No fear. No bouncing in the lane. They even hook like a mother. They have done 9’s on TT Vipers.

Lol, driving a Viper with Nitto Invo's in the rain was the scariest thing I've ever done. Definitely recommend Michelin's if you will be driving in rain.

[MuscleJunkie]

Thanks for the pictures and input. If anyone else has some photos of these tires installed at stock ride height - would be appreciated!

Thanks again.

[Stealth78]

Thanks for the pictures and input. If anyone else has some photos of these tires installed at stock ride height - would be appreciated!

Thanks again.

I'm confused on what you are trying to accomplish. What does the stock ride height have to do with it? I mean I could understand if you were worried about rim width, which is clearly not a problem. I could understand if you were worried abut clearance issues, but I'm 3/4 of an inch lower than factory and have zero issues.

[MuscleJunkie]

I'm confused on what you are trying to accomplish. What does the stock ride height have to do with it? I mean I could understand if you were worried about rim width, which is clearly not a problem. I could understand if you were worried abut clearance issues, but I'm 3/4 of an inch lower than factory and have zero issues.

Was just wondering if the small difference in tire height changed the visible rake of a factory set ride height car. They are here - hopefully will have them installed in a few weeks.

Thanks

[VOI9PMS]

Here they are with stock ride height. I added the Tredwear to make it go faster
fullsizeoutput_4da.jpgIMG_2604-1.jpg

[MuscleJunkie]

Here they are with stock ride height. I added the Tredwear to make it go faster
fullsizeoutput_4da.jpgIMG_2604-1.jpg

Looks great. Are they labels on the tires or ?? I like that look

[VOI9PMS]

No, they are individual Rubber letters that are glued on. Long process to clean tires to get them prepped but they are not coming off if you spend the time. The company i got them from is called "Tred Wear". They will make any letters you want in any color.
fullsizeoutput_4fa.jpeg
The tires you mentioned, with & without the letters and factory ride height.