02 Viper GTS stripes

[rnr510]

I have a quick questions regarding the stripes on an 02 Viper GTS. I am having my bumper repainted due to someone backing into it in a parking lot and wanted to confirm how far down the stripes go. Is this version from Viper exchange correct for a stock car? Is the last vertical inch or so not supposed to have the factory stripes?

http://cdn-ds.com/stock/2002-Dodge-V...2c5d87e7d3.jpg

My car is at the body shop right now and so I cant take a picture of it right now. Thanks

[rnr510]

Bump - anyone?

[RedTanRT/10]

Surprised you had to bump this thread. That picture looks correct but this should help more.

Here's a good picture of a new one on ebay as well as the link to the part with multiple pictures, good luck, Mike

viper bumper.jpg

https://www.ebay.com/itm/NEW-OEM-NOS...wAAOSwqqRa6NxO

[thetalonguy]

Just checked, my 02 stops at 90 degree turn as shown above.

[rnr510]

Perfect - thanks guys.

[Fatboy 18]

yes that picture is correct you should also be able to feel the edge of the stripes with your hand, at the factory they did not flatten down the stripes and clearcoat them.

[Fatboy 18]

interested to know the paint code for the silver stripes. i'm using a mitsubishi silver which seems to match.

[AviP]

Goes down to the curved underside on my B/W GTS similar to the red bumper posted by RedTanRT10.

[Drakkor]

... you should also be able to feel the edge of the stripes with your hand, at the factory they did not flatten down the stripes and clearcoat them.

Thanks, I was just about to ask about this!

[sparkrn]

Don’t forget the factory overspray down in that area. If you are looking for the original look!

[Viperenvy]

QA9 Viper Silver was 1999