Gauging Interest DSE Door panel speaker grille

[SSGNRDZ_28]

Target cost $95 per side in matte black (or less $ with high interest).

Thanks
Doug


FF21213F-DE69-434E-BAC1-FC853A65A754.png

[dirtyboot]

I'm inbetween vipers and still interested, I'm sure there's plenty of others

[ClayR]

I think there would be a lot of interest in this. I know my old car needs two.

[Special Ed]

Yes and yes

[parabs]

Yes, very interested as well

[mathias]

I am interested, too

[cashcorn]

Anyway you can make a copy of the oem?

[SSGNRDZ_28]

Anyway you can make a copy of the oem?

Not sure, do you have a picture?

[Martin]

I'm definitely in. Also interested in something that looks OEM if possible, or something that will work well with the tweeters. The high frequencies need either an acoustically invisible cloth or a really fine mesh.

[parabs]

Not sure, do you have a picture?

0AD15506-CA39-480E-84D9-2B490365FE5D.jpg

Ask and you shall receive....its the same mesh as the lower door speaker.

[cashcorn]

Awesome! If you can, I'm in..

[CNU_Physics]

Might help
https://www.youtube.com/watch?v=e2Xp6m_bU2c

[Simms]

These will be a winner.

[HANKFAN]

Would buy a set for sure.

[bassplayrr]

I’m in.

[Lost me beer]

Please excuse my ignorance, but what is the need for this? Are the oem ones prone to failure, or do these just look better?
Troy

[parabs]

Please excuse my ignorance, but what is the need for this? Are the oem ones prone to failure, or do these just look better?
Troy

upgrade your stereo from the 3 or 12 speaker system to the 18 speaker system. The upgrade package that includes these grilles (that do not have a part number) has been on back-order for about a year, if not longer.

[Lost me beer]

Gotchya!
Love my tunes, but love the exhaust note more!
Troy

[threatta]

Interested if they look OEM

[silver7iron]

Interested for sure

[CarDude]

I need this!!!

[sadil]

Interested.

[Vipes]

Yup!

[viper04]

Very Interested.

[sadil]

Not sure, do you have a picture?

I suggest getting your hands on a car with the mesh and just copying the exact piece. It is pretty simple. I was going to do this and offer them as well but you have much more resources than I do. Seems like step 1 would be laser cut mesh pieces including folding tabs. Step 2 would be pressing using a wooden mold to get correct shape.