Can you identify this

**pete.best** · 03-23-2018

I bought this to put on my TA. Seller said it was from an ACR, but it doesn’t have the stripe at the top/center like most ACRs seem to have. What’s it from? It’s alcantara and has the carbon trim,if you can’t tell in the pics. Thx!

**cubeman** · 03-23-2018

I can't recall off the top of my head but I don't think my ACR wheel has the perforations where your hands go. Makes me think it's been rewrapped. That center looks like real carbon and the filled in SRT so thats real. Maybe the original owner had it rewrapped for the perforations and remove the center stripe?

Edit: No perforations or anything on the wheel where your hands go.

1C3BDECZ8GV100286_aaf79e01fa5637f9.jpg

**Scot@Prefix** · 03-23-2018

I have seen an ACR steering wheel without the stripe, the SRT8 grand cherokee has an almost identical steering wheel to the viper.
We were looking at them when doing an automatic conversion, since they have the automatic paddles.
Should be a part number on it to look up.

**38D** · 03-23-2018

Srt8 wheel is not flat at the bottom.

**Terminator02** · 03-24-2018

Originally Posted by 38D

Srt8 wheel is not flat at the bottom.

The 16-18s are squared at the bottom but not to that extent. The wheel and the "suede like material" that is found on a lot of the SRT products is similar to the headliners of my SRT Jeep. If carbon options had weave that was not as clean as what is normally optioned in most vipers I can see that being from an early GTS; that SRT branding is definitely not part of the ACR though. The stitching, at least from the pictures looks to be of a different quality as well even varying in big to small stitching based on which section is being worked on. The microfiber perforations look identical to the microfiber seat inserts in many of the Jeep lineup. While it looks to be a real Viper wheel and I am sure those are OEM numbers, I do not believe this is a genuine OEM part for too many suspect issues going on. Doesn't mean it isn't a great wheel and the OP can easily add the driver's line tape.

edit: On second look, the alcantara doesn't even look like the OEM in the ACR but closer to the SRT Jeep headliner or some aftermarket suede like material.

**1of1TA1.0** · 03-23-2018

custom wrapped wheel possibly? I have not seen an ACR without the stripe but apparently Scot has. I have never seen any of the wheels with perforations. As Scot said, ask for the part number that is on the label.

**cashcorn** · 03-23-2018

Looks like a wheel from a carbon fiber interior upgraded car that has been rewrapped. Goggle the part # off the sticker..

**pete.best** · 03-23-2018

Both numbers on the stickers have no results. They are OE stickers for sure, I even took it to the dealer and they could not figure it out. I’ll post a pic of the stickers later Tonight, maybe someone out will recognize

**canadian viper** · 03-23-2018

off a challenger or charger ?

**BJG32** · 03-23-2018

Looks better without the random stripe.

**cashcorn** · 03-23-2018

looks just like the wheel off my car. However, mine is leather

**PkB2014** · 03-23-2018

Whatever it is the Cf Bezel is worth $700-1000 according to FCA.

**Lost me beer** · 03-24-2018

Didn't think "SRT" made an ACR. Looks like a 13/14 wheel from a GTS with the added Alcantra int maybe?
Troy

**pete.best** · 03-24-2018

Originally Posted by Lost me beer

Didn't think "SRT" made an ACR. Looks like a 13/14 wheel from a GTS with the added Alcantra int maybe?
Troy

I had never thought to look-but when I googled pictures of ACR steering wheels it seems like they all say “ SRT”

**pete.best** · 03-24-2018

Here is the sticker. What do you think? The material does not look like it’s been done after the fact...I guess it’s a possibility but the stitching is identical to my ‘16 stock wheel.....