Overview:

Solid Street Shield
Debris and water can escape the openings on the wheel vents on the ACR Extreme hood. The solid street shields greatly reduce or eliminate any debris exiting the wheel vents.

Vented Track/Street Shield
Track and street debris will escape the openings above the wheels once the plastic vents have been removed. The vented track/street shields prevent larger debris from being flung onto the top side of the car and windshield while still maintaining a large amount of airflow and downforce levels. On the street these allow for a more aggressive look while still maintaining some level of protection.

Compatibility:
The solid shields are meant for street use only on 2016-2017 ACR Extreme Vipers. They require the plastic wheel vent to be installed as they install on the underside of it. The vented shields are meant for street / track use on 2016-2017 ACR Extreme Vipers. They require the plastic wheel vents to be removed as they install in place of them.

Construction:
The shields are fabricated from aluminum and hard coat black anodized.

Weight:
The set of vented shields weighs 0.9 lbs while the solid shields weigh 1.6lbs.

Ordering Information:
DSE-VP-EA-008: ACR Extreme Street Vent Shield - Solid Street Version (use w/ Plastic Vent) (Set of 2)
DSE-VP-EA-010: ACR Extreme Vent Shield - Vented Track/Street Version (Stand Alone) (Set of 2)

Installation instructions:

Installation is simple, requires no extra hardware, and as always no modification to your Viper!

http://nebula.wsimg.com/ba04e3ad8ac9...&alloworigin=1
http://nebula.wsimg.com/84728896b0ef...&alloworigin=1

Vented Shield Set
IMG_3440.jpg

Solid Shield Set
Solid street shields.jpg

Solid Shield Installed (showing debris intercepted after <100 miles)
19598763_1344040848977048_4732154486109827417_n.jpg

Vented shield installed (showing airflow paths through and around the shield)
IMG_3470.jpg

Vented shield installed
IMG_3462.jpg