Mph

[BlueAdder]

For the life of me I can't figure out how to display the current MPH next to the RPM gauge on the bottom right.
It was showing on the TA I drove at Bondurant and I've seen videos in which the current speed was showing but so far I haven't figured out how to get it to show on my ACR... It's kinda difficult to read your speed from the speedometer since it's all the way to the left and is pretty damn small (and I guess I'm getting old).

The only speed display I can get is on the performance pages app, in the engine page.
There's nothing in the user manual either :/

[texasram]

Its all in the sub menu using the directional arrows on left of steering wheel

[bluesrt]

I cant figure it out either

[Martin]

I was advised to hook up a battery charger to the car, and mess with the displays until I figured it out. The user manual isn't all that great, and the interface isn't super intuitive... I've seen some configurations that looked perfect, but I've yet to figure out how to do things like what BlueAdder is trying to do. I like the instrument layout a lot more than I liked the one on my Gen IV (on that one all the important gauges were hidden by my right arm), but it seems like you've got to be a rocket scientist to figure this system out (which I am - so now I feel embarrassed).

[ViperGeorge]

I had a heck of a time reconfiguring the dash display until I realized that once you set it in the menu you have to hit "ok". At least I think that's what I had to do.

[ViperSRT]

Getting the MPH was semi straight forward using the menu as indicated above. That said has anyone found a way to have the SRT gauges come up automatically? Not only is the process a pain but it seems to take forever to load.

[GTSilver]

Getting the MPH was semi straight forward using the menu as indicated above. That said has anyone found a way to have the SRT gauges come up automatically? Not only is the process a pain but it seems to take forever to load.

Yes for the SRT gauges !! The only time I wish I had analog gauges in my gen v.

[One Viper Bite]

You're probably not pressing the > button to commit the changes. I made that mistake and went through the menu 3 times before I stopped to read the display. It tells you what you have to do to save the changes.

I will give you a step by step later when I get home.

[BlueAdder]

You're probably not pressing the > button to commit the changes. I made that mistake and went through the menu 3 times before I stopped to read the display. It tells you what you have to do to save the changes.

I will give you a step by step later when I get home.

I just can't find the MPH thing in there. I was able to set up the little gauge on the top right and top left (one for oil temp and the other for water temp) and those are fine, but the speedo, I haven't seen it at all. Must have missed it obviously. I'll try again tonight. I'm going on a road trip with the snake tomorrow and I wouldn't mind figuring this out before then.

[ACRSNK]

I was wondering the same thing.

[ACRSNK]

I was advised to hook up a battery charger to the car, and mess with the displays until I figured it out. The user manual isn't all that great, and the interface isn't super intuitive... I've seen some configurations that looked perfect, but I've yet to figure out how to do things like what BlueAdder is trying to do. I like the instrument layout a lot more than I liked the one on my Gen IV (on that one all the important gauges were hidden by my right arm), but it seems like you've got to be a rocket scientist to figure this system out (which I am - so now I feel embarrassed).

If an actual rocket scientist can't figure it out, what does that mean for the rest of us????

[mblgjr]

Just scroll with the arrow keys on the wheel. Its pretty straight forward.

As to startup to the SRT Perf Pages "gauges" screen... wish it would default to them but it wont. Have to go into that menu manually every time.

[One Viper Bite]

Here's a quick video for you all. Just follow the arrows indicated on the display with your steering wheel controls. https://www.dropbox.com/s/vw8wjctroo...%20PM.mov?dl=0

1. Use the up and down arrows to navigate to the Guages icon on the left
2. Press >
3. Use up and down arrows to navigate to "Digital Speed"
4. Press >
5. Press up or down arrow to change from "Off" to "On"
6. Press < button to exit
7. Press < to exit again