Results 1 to 20 of 20
  1. #1

    Interior Door Panel Separating

    Came out this morning and opened the passenger door and the interior panel has a significant gap st the top. Tried to push it back together but couldn't. Will have to take to dealer. Anyone else have this happen?IMG_0048.jpg

  2. #2
    Enthusiast
    Join Date
    Nov 2013
    Location
    Maryland
    Posts
    152
    It's the crappy clips used in the door. Get the part number online, and Purchase an entire box off eBay for like $10. Once you pull the door panel off, replace the clips and bang Pretty hard (with the window Down) to re-secure. Buy extra clips as these Break alot and are cause for door panel rattle. Did it a bunch of times.

  3. #3
    Yes, mine did (passenger side was loose). While the car was having other work done, tech fixed it with a clip. However, it is very flimsy, so when pulling the door shut, they loosen again.
    I think I will buy some clips, as they will break again, depending on how much the door is pulled shut.

  4. #4
    Enthusiast
    Join Date
    Apr 2015
    Location
    Detroit, MI
    Posts
    1,183
    If the clips are correctly snapped into place, they will not move. Ensure that you check the female side of the clip as well. If the male side has nothing to grab onto, you will not be fixing the problem. After taking the car apart, I actually like the clips they used to get a snug fit. Only problem is how violent they are to remove and how hard you have to push to get them to seat.
    .

  5. #5
    Thanks both! Sounds like it's a "feature" of a low volume car. Appreciate the quick replies. The car is so ridiculously amazing that I can overlook these types of things.

  6. #6
    VOA Mamba Member
    since 2013
    Houston

    Join Date
    Oct 2013
    Location
    Houston
    Posts
    958
    That happened to mine as well. Dodge won't sell the clip by itself so I got a new door panel under warranty . . .

  7. #7
    Quote Originally Posted by Herrsss View Post
    That happened to mine as well. Dodge won't sell the clip by itself so I got a new door panel under warranty . . .
    I guess my tech had clips lying around. Got lucky.

  8. #8
    Enthusiast
    Join Date
    Apr 2015
    Location
    Detroit, MI
    Posts
    1,183
    Quote Originally Posted by Herrsss View Post
    That happened to mine as well. Dodge won't sell the clip by itself so I got a new door panel under warranty . . .
    Not that you would be complaining with a new door panel under warranty, but the clips are readily available, part 06509673AA.

    http://www.factorychryslerparts.com/...6509673AA.html

    Some dealers man, funny folk.

  9. #9
    Quote Originally Posted by Herrsss View Post
    That happened to mine as well. Dodge won't sell the clip by itself so I got a new door panel under warranty . . .
    This is a joke, right? Pack of 15.

    http://www.clipsandfasteners.com/Chr...A_p/a21601.htm

  10. #10
    I was yet another victim. A full track day exacerbated the condition. Local dealer applied new clips and it didn't occur again. Cheap part, pretty embarrassing, but a quick easy fix.

  11. #11
    Quote Originally Posted by ViperJon View Post
    Thanks Jon, I just ordered a pack!

  12. #12
    Enthusiast
    Join Date
    Oct 2013
    Location
    Montgomery Texas
    Posts
    6,732
    Quote Originally Posted by ViperJon View Post
    We repaired it here at ViperExchange. She is thinking of another part not the one mentioned in this thread. Yes those clips are availble.

    Andy

  13. #13
    Enthusiast
    Join Date
    May 2015
    Location
    New York City
    Posts
    985
    Quote Originally Posted by apeas2 View Post
    It's the crappy clips used in the door. Get the part number online, and Purchase an entire box off eBay for like $10. Once you pull the door panel off, replace the clips and bang Pretty hard (with the window Down) to re-secure. Buy extra clips as these Break alot and are cause for door panel rattle. Did it a bunch of times.
    Guys, by any chance would this cause a door-mounted speaker to rattle? I have that noise and it's driving me insane. My door panel isn't separated like in posted picture though.

  14. #14
    Enthusiast
    Join Date
    Apr 2015
    Location
    Detroit, MI
    Posts
    1,183
    Quote Originally Posted by ek1 View Post
    Guys, by any chance would this cause a door-mounted speaker to rattle? I have that noise and it's driving me insane. My door panel isn't separated like in posted picture though.
    The door panel uses 5 of these clips and your door speaker uses two bolts as well that run into the metal door frame. Would need to check all your fasteners.

  15. #15
    If you have the 18 speaker HK there is an upper and lower door speaker. It's possible they have unscrewed a bit and rattle especially the large lower door woofers.
    It's not a big deal to take the door panel off but you have to remove three screws first.

  16. #16
    Enthusiast
    Join Date
    Mar 2015
    Location
    Alberta Canada
    Posts
    1,686
    Quote Originally Posted by ViperJon View Post
    I bought some of these spare clips from my local dealer, and they work, but they are different than the original ones that are in there, which are black, and the male portion is smooth, rather than serrated on the white ones, anyone else notice this?

  17. #17
    Enthusiast
    Join Date
    Mar 2016
    Location
    Flower Mound, TX
    Posts
    799
    My driver side panel is slightly loose and I think one of the clips has failed. Thanks for the info! Ordered.

  18. #18
    Enthusiast
    Join Date
    Dec 2016
    Location
    Southern Ontario
    Posts
    105
    Has anyone who owns a Gen 2 as well had this problem? Would the clips be the same clips? I have this exact problem on my 96 Gts. Wonder if that part number is the same?

  19. #19
    Enthusiast
    Join Date
    Aug 2016
    Location
    NorCal
    Posts
    587
    Quote Originally Posted by ek1 View Post
    Guys, by any chance would this cause a door-mounted speaker to rattle? I have that noise and it's driving me insane. My door panel isn't separated like in posted picture though.
    And that's why I'm glad that my ACR-E came with 3 measly speakers

  20. #20
    Enthusiast
    Join Date
    Oct 2013
    Location
    SoCal
    Posts
    1,280
    Just ordered for my "parts" dept...


 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •