Part 2 DIY Energy Suspension Polyurethane REAR Control Arm Bushings Install

**Boosted Motorsports** · 03-06-2017

Finished Part 2 of my install video for the Energy Suspension Polyurethane control arm bushings. Car is on the ground and not a single squeak, click or noise. Very tight handling, still need to send it for an alignment but a quick drive to the store to settle everything and I am very happy with it! Also gave me a chance to clean and freshen all the suspension components as you'll see in the video

**Lemay88** · 03-06-2017

Again, great video with good details on how to do it.
Thanks for providing us, shade tree mechanics, tips and DIY informations.

Ben

**98RedGTS** · 03-07-2017

Another good video. Looks to be about the same as the front with the added steps of removing the half shafts.

Will you be doing a video of the rear diff? Looking forward to seeing what all is involved with that install as well and would love to see a parts list for the whole project. Also, when are you coming to Austin to help do mine?

**Boosted Motorsports** · 03-07-2017

Originally Posted by Lemay88

Again, great video with good details on how to do it.
Thanks for providing us, shade tree mechanics, tips and DIY informations.

Ben

No problem! More to come!

Originally Posted by 98RedGTS

Another good video. Looks to be about the same as the front with the added steps of removing the half shafts.

Will you be doing a video of the rear diff? Looking forward to seeing what all is involved with that install as well and would love to see a parts list for the whole project. Also, when are you coming to Austin to help do mine?

I have to edit the footage from the diff install. It was pretty dark under there and not much room since I was laying under there with jack stands so might not be quite as detailed as the last few but definitely will be able to see what all is involved. I may actually be back and forth to DFW quite a bit soon!