Removing front fender

[stradman]

Hi all , I would like to remove the front fenders and after having a look I was wondering if the sills has to come out first. Has anyone removed the front fender before? Thanks

[dethred]

Uhhhh, what front fenders? There's the clamshell hood, the side sills - that's it.

[dewilmoth]

Uhhhh, what front fenders? There's the clamshell hood, the side sills - that's it.

I'm guessing he means the panels in front of the doors. Not sure of their technical name.

[ViperPete]

Here is a link to my Belanger header Install. I go into great detail on how to remove the side sills. Assuming that is what the OP is talking about.

http://driveviper.com/forums/threads...hoto-intensive

EDIT

If the OP is talking about the panels inside the side sills, then yes i do believe they can only be removed once the side sills are also removed.

[stradman]

I'm guessing he means the panels in front of the doors. Not sure of their technical name.

yes exactly. They're called fenders.. Even by Mopar!

[BJG32]

I'm curious what you are doing that requires removing them?

[7TH_SIGN]

I've removed them along with the side sills. I have a write up on here. Just a couple of screws and bolts. You will have to loosen the side of the sill nearest to the fenders in order to remove the fenders. Be very careful and use a lot of painters tape!!! You will scratch the fenders and side sills if your not extremely careful! It's better and easier to remove the side sill.

[bluesrt]

its a 5 minute job to remove the sills,just remove them and get them out of the way

[stradman]

I figured that I have to remove or loosen the sills. I just want to avoid the 2 blasted bolts at the rear of the sill over the exhaust tip. But I think if I loosen the front half should be able to get the fender out. I'm wrapping it for a bit of bling! ; ) Easier to do when its off.