ACR front belly pan removal

[Arizona Vipers]

Hi guys,
I'm trying to install an underdrive pulley on '16 ACR. I'm trying to do it from underneath. The front belly pan has 4 bolts in the rear that came right out conventionally.
The others up front and sides, look like rivets and just spin. They don't unscrew. How the hell do these come out with no access to the top?


Thanks.

[Arizona Vipers]

I ended up doing the install from the top. But would still like to know how to get that front belly pan off. lol

[Bleed viper]

Glad you got it figured out, was it difficult from the topside? Was going to do this myself, do you need a torque wrench? Like to know what you think, before and after? Go with the IPSCO one?

[Arizona Vipers]

Glad you got it figured out, was it difficult from the topside? Was going to do this myself, do you need a torque wrench? Like to know what you think, before and after? Go with the IPSCO one?

Yes, it was very easy from the top. I have the Doug Shelby heat shied installed so that added a little bit of time. But it's pretty straight forward. Unscrew the hose clamps on the air tubes, unplug the sensors, unscrew the front of the airbox and pull it off. From there it's really straight forward, just follow Jack B's install here- http://driveviper.com/forums/threads...erdrive+pulley