Catch Can Kit for Gen 3?

[rhallman]

Who currently is selling an oil catch can kit for a Gen 3? Thanks...Rich

[NJDAVE]

Who currently is selling an oil catch can kit for a Gen 3? Thanks...Rich

Rhallman,
I did my own catch can without a specific kit for Gen3 Vipers. Here is the link to Accurate Machine Works. This is who I found made the highest quality unit.
http://www.accmachtech.com/catchcans.asp This unit has a great design & works awesome. See Pictures of my install. Very easy to do.
catch can 1.jpg
catch can 2.jpg
catch can 3.jpg
catch can 4.jpg

I hope this helps you out!
Dave.

[usmcly]

where is it connected to? i am getting my paxton installed now and would like to add a catch can as well

[NJDAVE]

where is it connected to? i am getting my paxton installed now and would like to add a catch can as well

The Paxton kit routes the passenger side pvc vale from the valve cover to a plastic pipe that runs under the intake manifold and then connects to a hose that connects to a fitting in the air intake box. This setup also gets oil in the intake which you don't want. I connected the catch can in between the air box and the plastic pipe. You wont be able to see this until your Paxton kit is installed. The stock setup does not allow for this setup. I hope this helps you.
Dave.

[usmcly]

Thanks NJDave for the info! Hopefully i get it back soon!

[Bill Pemberton]

I would just contact Mark Jorgensen for a little advice. He and crew have done over 400 SC installs , so should be able to answer any concerns for you. Helpful guy and won't mind answering
your concerns.

mjorgensen@woodhouse.com
1-800-889-1893